Hanging a curtain rod may seem like the easiest thing in the world. However, if you don’t know how to hang a shower curtain rod, you could make a serious mistake. If you do it wrong, you’ll end up with three holes in each wall located in the wrong place.
If you don’t want to call a mason to solve the disaster you caused, pay close attention. These tips will help you to perfectly install your bathroom curtains.
Contents:
What Is Shower Curtain?
A shower curtain is a decorative element that prevents the shower water from splashing outwards. They are manufactured in different sizes, but the most popular model is a perfect square of 1.8X1.8 meters.
Most shower curtains are sold with their respective liner, which is a waterproof layer made of PVC or vinyl clothing that protects against mold, mildew and moisture. Both have 12 perforations in their upper edge, through which the hooks or clamping rings pass.
The hooks or clamping rings are made of stainless steel for long durability. They’re usually sold together with the curtain and the liner, although they can be purchased separately in case of loss.
Why Need Rod To Hang A Shower Curtain?
A rod is the main support of a shower curtain. Its ends are supported on two metal rings screwed to the walls. According to the adjustment type, rods are classified into: tension rods and mounted rods.
Tension rods are formed by two bars joined through a thread. When rotated counterclockwise, the rod extends. Turning clockwise, it shrinks. On the other hand, mounted rods always maintain the same length.
The installed rod must be able to withstand the curtain’s own weight and additional stress efforts to be truly safe. For that reason, it’s important to do some stress tests to guarantee perfect stability.
Steps Of How To Hang A Shower Curtain Rod
Well, here is a complete guide to hang a shower curtain rod. Hope this guideline will help you to do the work perfectly.
Know the Dimensions of the Curtain to be Installed
Usually, bathroom curtains in the market have standardized dimensions. The total height of most models is 1.8 m. In case of any doubt, it’s advisable to consult the dimensions on the packaging.
If this isn’t possible, then it’s necessary to use a measuring tape to determine the actual dimensions.
Determine the Installation Height
According to international standards, the bottom edge of any shower curtain should be 5 cm above the shower floor. Also, the separation between the top edge of the curtain and the upper edge of the rod must be 10 cm.
Then, the height from the floor to the upper edge of the rod would be: 5 cm + 180 cm (curtain height) + 10 cm = 195 cm = 1.95 m. You should make sure to mark the same height on both walls of the bathroom so that the rod is perfectly horizontal after installation.
Install Supports, Rod and Curtains
Using the installation height as a reference, the supports are installed; each attached to the wall with three screws. Mounted rods need to be installed along with the supports. This doesn’t happen with tension rods, which are adjusted after installing both supports.
With the help of a spirit level, verify that the rod is perfectly horizontal. Finally, make some stress tests, pulling downward from the midpoint of the rod. If it remains stable, the hooks or rings, the curtain and the liner can be installed.
Final Words About How To Hang A Shower Curtain Rod
Meanwhile, you’ve learned about how to hang a shower curtain rod. Well, installing a curtain requires applying some mathematical logic. Although you don’t need to be a genius to do it, you need to be very attentive to drill in the right place. Nor should you forget the spirit level to guarantee a perfect installation.
Taking these tips into account, you’ll achieve a stable and perfectly horizontal rod at the first installation.