When your car is not running well, such as burning hot or having loud flames, you should look at the spark plug. One issue that many people face is finding a replacement for their original spark plug.
This is a problem for those who replace their plugs during different vehicles or when the vehicle has changed spark plugs. Using the same replacement plug can be problematic due to poor installation.
Bullet point: Performance Spark Plug – Buy Now!
Performance Spark Plug is an all-purpose replacement for your car or truck sparkplug. It offers excellent performance, good reliability, and does not stick out like a shockwave when you turn the engine over. This makes it a good choice if you do not want to mess with putting in another plug type or if one does not fit your car or truck.
When using Performance Spark Plug, it is important to make sure that it is set right before use.
Contents:
What are the benefits of this design?
This design reduces plug wear and removes the need for a washer or sealer. This saves you money in the long run as well as prevents future plug leaks.
This new design is more precise and precise again. There is no guessing whether or not to add or remove downward pressure on the plug to seat it fully. This is done with positive pressure on the sparkplug.
This new design eliminates any chance of plugs being displaced due to gravity or residual pressure from other parts of your engine. This is a huge benefit as plugs can cost you a pretty penny very quickly.
The benefits of this boot are clear when looking at an engine with no signs of plugs reseating or poor compression readings. A 90 degree boot will prevent any flats or cracks caused by this occurring.
Will this design work with my current setup?
There are a few different ways to install a plug in your engine. You can do it by cutting and running an extension cord from the battery to the sparkplug, or you can use one of these new boot style plugs.
Both methods require knowledge of your engine and how much power you generate!
Either method allows you to connect the boot to your charger, so this becomes a no-brainer.
What should I look for in a good 90 degree spark plug boot?
When looking for a new spark plug boot, there are some important things that you should know.
It is best to buy a size larger than your car requires because some cars require a smaller boot. Our headlights require the Large boot so I recommend looking at those boots to see if they fit your car.
The large boot should be able to fit your foot comfortably even with the boot on. Some have reported having to buy an extra pair of shoes to correct this problem.
Lastly, it is best to buy a color that looks good on your car.
Where can I find one?
You can find these boot replacement packages at most hardware stores, automobile accessory stores, and online. Most places have a few in stock even on weekdays!
This is a cost-effective way to keep your car performing like new while also being rewarded with a little bit of speed!
Bullet point: How do I replace the plug?
The plug can be removed by pulling on one end of the boot and lifting up. Then, pull off the other end and discard. You will need to replace the plug when it is burned out or becomes cold due to having only two plugs left.
To keep my car performing like new, I needed to put in a new plug about every five years or so.
What is a 90 degree spark plug boot?
A 90 degree plug boot is a piece of metal that goes on top of the spark plug. The boot has a hole cut out for the spark plug and an electrical connection made to it.
This additional piece of metal protects the sparkplug from getting burned up by the Ignition Interrupter (I&R) circuit. The I&R circuit prevents electricity from flowing through the sparkplug, ensuring it stays hot until you connect it to your battery.
By having an I&R boot, your car will run longer while you are looking for another solution! Many people find them helpful when starting out as they are able to get a car running on a few minutes of power.
The design of the 90 degree spark plug boot allows for easier access to the spark plugs
Most vehicles have spark plug boots that are affixed to the cylinder head. These are meant to protect the spark plugs from oil, fuel, and other substances.
You can remove the boot if you wish, though it may be difficult or impossible to do so in some vehicles. The height of the boot also varies based on vehicle.
A taller boot may require a different sized spark plug. An easier way to check if a spark plug is too tall is to drive a car with only one spark plug and no boot!
The 90 degree angle allows for easier access to the spark plugs, allowing you to remove them quickly if they are too tall.