Stump grinding is a technique that can be used for many different kinds of self-defense. While not very common, there are some animals that have human-like claws or sharp horns.
Typically, these animals do not use their horns or claws in combat, but rather with the aid of a grinder they can create a sharp and long tool. Grinding is the process by which the animal creates its horn or claw.
Grinding is an art form and most professionals do not start out as humans. However, once you learn how to grind you can show off and everyone can enjoy your talents.
Contents:
Check for nails
If you are trying to thread a nail, make sure that your first attempt is not the best. Try a few times before giving up. Many people find that removing some of the existing nail length before attempting to thread the new nail helps create more space to put the new nail on.
On the other hand, if you are trying to Thread a Thread, then try! A Thread is a much longer and straighter nail. The riskier the project, the more valuable this skill is. Luckily, we have Threadettes here at Tracie to help with all our customers who need help getting started.
Allow concrete to dry
After your concrete has congealed, you can start to break it up. This may require a knife or saw!
Breaking up concrete requires a lot of time and effort. It takes a few hours to get the job done, and then the rest of your day to remember! So, do not rush this process or you will risk breaking up some pieces that are still soft.
You will need to work in small portions of concrete so it does not set back down. This may require use of another tool such as an hd wrench or tool kit. Once all the concrete is broken up and dry, put a cover on it to prevent rainwater from seeping into it.
Then, let it harden in the sun and wind which creates more access to take care of it.
Inspect surface
After your die is cool, it is time to inspect the surface of the die. If you are working with a large die, try doing a few passes to make sure your pass is getting an adequate look at the surface of the die.
On most dies, you can do this by passing the die along its length or between thumb and fingers. If you can pass the die only one way, such as through a small opening or link, then that’s what you’ll be connecting your masterpiece to.
You’ll need some kind of padding for this process, so get some toy soldiers or something similar and use them to protect your hands from the tool. Once you have passed yourdie through each pass, let it sit for a few minutes to make sure it is taking full shape.
Sand surface
Once the die is flat, it is time to wrap the card around the block. This can be accomplished by removing any air bubbles or looseness that may have occurred while pressing the die into the blank.
To do this, start with a small piece of sanded paper and wrap the die up and down until it is secure. Then gently pick up the block and let gravity do its work!
This takes a few attempts, but eventually you will get it.
Apply primer
When you are finished grinding, it is time to apply a primer. A primer can prevent your alloy steel blade rest in the metal. Some primers can make your alloy steel blade finish very shiny!
To prep your blade for painting, rub some Germans chalk on the back of the blade. This will prevent your blade from shifting while you paint.
To paint, start with a soft base coat and a harder top coat. Start with light dusts and lessen the coverage with each pass, until only the faintest bit is there. Then add some paint and let it dry!
Parquet can be painted many ways, but I would recommend using a strong medium or hard paint for this article.
Apply paint
If you are still working on your project, you can take a break and apply some paint onto your project. You can do this after the die is cut, or even while you are working on it.
Using a pencil eraser or a credit card, rub some paint onto the die. This will protect the metal from further wear and tear. Once it is dry, lift it up and let the paint dry completely before reworking the project.
Re-workings of projects can include change of color, new patterns, etc. Addition of edges or reinforcing will be needed to keep this project sturdy.
If you are wanting to start anew with this series, begin with the basics: basic cutting techniques, how to use the ruler/life line method, and how to use the compass/compass system.
Make sure the stump grinding did not warp the surface too much
If the stump grinding did not look or feel smooth enough, then you can add some more stump grinding. There are several ways to stump grind. By choosing one of these methods, you are setting yourself up for success!
Using a higher-priced long-endurity tool will give you more chances to perfect your stump grinding. Using a shorter-length tool will give you less chance to make a mistake.
If you are using a powerhammer, try using one with about a half inch of additional length in it so that it reaches to the top of the tree trunk.
Reapply sealant if necessary
If you applied the right amount of sealant at the beginning of your grinder, there are still some occasional spots that need more of it. If this is the case for you, then continue to do so until you have removed all of the grinded lumber.
Many people find that removing some of the sealant with their hands promotes easier removal and further preservation. Using a properly sized brush or credit card slot can help in this as well as removing some scale from around the base.
If you needed to add more sealant to secure your grinded lumber, do it immediately after grinding so that it adheres fully. Doing it over a weekend allows enough time for it to dry and for other members of your group to come by to check on you!
Another way to help maintain your wood is to keep an eye out for any water rings. These are formed when water has pooled around the base of your grinder and then drain out. This prevents potentially harmful water damage.