Radon is a rare earth element, found mostly in rock and soil. When it enters the home through the air and water, it can move around and affect people inside their bodies. Radon is usually identified by its orange or red color.
Home energy systems, like radon vent fans, are one way to reduce your exposure to radon. These systems connect directly to the earth’s natural radiation system to capture and use the sun’s energy.
Many homes have small radon concentrations in crawl spaces or other areas without direct sunlight, making it difficult to determine if a fan is too small or not enough. Most manufacturers provide a two-year guarantee on their fans so you do not have to worry about running out of power.
This article will discuss what size fan you should get and how often you should replace them. There are also cost-of-ownership benefits that will be discussed.
Contents:
Calculate how much ventilation you need
When you install a Radon mitigation system, you’ll need to calculate how much ventilation it provides. This depends on what size room you want to reduce the radon exposure in.
The amount of airflow a room needs determines whether or not that room is suited for radon gas travel. Some people find that a little bit of ventilation is nice, so we offer some extra features like fan assistance.
A good example of this is in the bedroom where sleeping is pr truful but other activities can happen. A small bedroom may not require a larger fan to achieve the desired result.
A larger bedroom may need more space so that more air can move around.
Choose a fan that can provide enough ventilation
When you buy a fan, it is important that you choose the right size. You want to give your room enough airflow, but not too much!
Too much air flow can lead to heat disorder such as thermal stress or dysregulation of thermostats and air conditioners. This can be problematic because you do not want to open a window to allow for adequate airflow.
Radon is a mineralized gas that moves through the vicinity of your home. This occurs when radon is present in your soil as an underground tunnel-system mineralization process.
As an intervention, radon removal services can provide fans to help provide sufficient airflow in your home. If you have a large home, or multiple rooms in your home that require relief, then it is important to find the best sized fan for your needs.
There are two main sizes of fan used for this intervention: The oscillating/static fan and the rotating/fan/motorized one.
Check the fan capacity
When you install a Radon fan, you will want to know how large the fan can grow. The capacity of a fan is measured in cubic feet per minute.
A smaller capacity fan can only produce as much air as it would in one minute, which is tiny. This would not be a problem if you were sleeping, but it would be extremely uncomfortable!
We recommend that you run your fan for at least one hour before checking to make sure it is operating at full capacity. If the fan looks small or thin, then you may need to get an upgraded model or take another day of installation on your radon treatment.
Checking the capacity of the fan will determine whether or not you need to add a second one or buy a supplemental Radon Treatment.
Make sure the fan covers all areas of the room
Radon is one of the leading causes of lung cancer. This gas can enter your room and affect those in your vicinity who are not ventilated from the outside air. Therefore, it is important to make sure the fan covers all areas of the room.
This includes covering any openings such as a window or door, or any areas that may be vulnerable to radiation such as furniture or decorative items. If a window is exposed, it should be protected by a sheer curtain or similar material to help prevent sunlight from reaching the fan blades.
In same fashion, anything that could be vulnerable to radiation should be covered by an operational radiation shielding. A shielding cover should always be in place to protect against accidental removal!
Make sure you have the correct size fan for your home! Home radon fans can get big, making it hard to determine which area they cover. Have a look at the National Council on Radiation Protection & Measurement (Ncrp) website for help in determining whether or not your fan meets these standards.
Use a calculator to determine the minimum required exhaust rate for your home
This may seem strange at first, but there is a special number called the U-value that needs to be considered when choosing an exhaust fan. This is the number of cooling calories per kWh that the fan requires to operate.
A fan with a lower U-value is required by fans. The term “U-value” actually refers to “utility value”, which is how it determines whether or not a fan should be installed in a home.
Homeowners often do not take this into account when choosing an exhaust fan, and thus overpay for a replacement fan that may not last as long as one that has been installed with higher U-values.
Check your local building code
If you live in a city with an existing radon meter, you do not need a new fan. But if you live in a country where radon is not regulated, then you should have a fan.
To be safe, every home should have a fan that can move up to 21 CFM of air per minute. That is over 2,000 CFM!
If your home does not have an air movement sensor or test kit, then you should buy one. A test kit will tell you if your fan is working properly or not.
Good models cost between $10 and $15 and are called moving-movement sensors.
Consult a specialist radon mitigation company
When it comes to choosing a radon mitigation system, there are some important things that you should consider. These things can change with every system, so it is important to stay informed.
Size is a factor when it comes to choosing a radon system. While some are made for smaller homes with less earth ground, public housing and single-family homes can have two radon meters in front and two behind. This shows that the home is large enough to absorb the air around it, which in turn reduces rates of Radon gas inside your home.
Another one of looking into is the way this unit works. Some systems capture and bury Radon directly while others use filters or devices to redirect the radiation outside of your home. This has an effect on building standards as well, since they have to be able to handle the pressure from the government.
Know the signs of radon exposure
Radon is an important gas found in many homes. Radon is considered a potential radon gas exposure risk due to its prevalence in homes with little or no ventilation and/or management of radon levels.
As stated above, radon is present in many homes without adequate treatment. However, because it is invisible, difficult to measure, and generally under-appreciated, people may be reluctant to seek treatment.
Because it can be difficult to detect, people may underestimate the need for mitigation. This can lead to missed opportunities to reduce exposure and prevent recognized symptoms of the gas.
Fortunately, the majority of people who suffer from reduced awareness of radon are non-smokers whose symptoms are limited to decreased breathing and/or breathlessness plus fatigue. These individuals may therefore prefer less intrusive methods of detection such as an X-ray or CT scan.