Well, this article will show you how to cut logs into slices.
Sound good? Then, let’s see what is included here.
Trees give us life. However, sometimes they also give us problems. The branches from a large tree can interfere with windows’ visibility or even worse, displace and exert pressure on walls, ceilings, beams and columns.
If the only possible solution is to cut the tree and you don’t want to call a contractor to do the job, here’s a guide to learn how to cut logs into slices quickly and easily. If you’ve already obtained the necessary permission, you only need the right hand tools to get started.
What is Tree Trunks?
Every tree is made up of three main parts: roots, trunk and branches. The tree trunk is the most robust and structurally stable part that serves as support for branches and leaves.
The trunk is attached to the soil through the roots, which are the main elements of foundation and collection of water and nutrients. Also, the trunk is covered by a hard and tough layer called bark, which protects the wood from pests and other external agents.
How to Cut Logs Into Slices – Step by Step Guide
You don’t need to be an expert lumberjack to know how to cut large logs into slices. You just have to follow a few simple steps and use the right tools to do the job like a professional. If you pay attention to these tips, nothing can go wrong.
01. Choose the Right Tool
By far, a chainsaw is the best tool to transform a trunk into slices in a short time. However, it’s also true that it’s a heavy and noisy tool. If you don’t have enough strength in your arms, it could slip and cause an accident.
In the case of medium and small trees, you don’t need to spend a lot of money on a new chainsaw. Hand saws and bow saws are very useful tools when used in the right way. Also, they won’t get your neighbors’ attention in the middle of the night.
02. Check the Edge of Your Saw
The teeth of a saw must be sharp and in perfect condition to cut smoothly. Before you start working, make sure your saw’s teeth are complete. The lack of teeth could cause your saw to get stuck in the trunk in the middle of a cut.
If you’re going to use a new hand saw or bow saw, you don’t have to put too much pressure to get a clean cut. If you need additional force in your arms to slide the saw through the wood, there’s surely something wrong with the blade.
03. Remove the Longest Branches
Some long branches can cause damage when falling. To know which branches to cut, define a safe area and identify which branches are out. You’ll need special safety equipment to climb and prune in case they are very high.
04. Cut a Triangle From the Trunk
Before making a cross section cut on the trunk, cut a small 90 degree triangle to one side of the trunk. This will help to define the weak side through which the trunk will fall horizontally after cutting.
05. Start Cutting
Start cutting the log horizontally starting at the tip of the triangle you cut in the previous step. When the tree begins to fall, place yourself in a safe position to avoid accidents.
06. Remove the Rest of the Branches and Cut the Log Into Slices
Once the trunk is resting on the ground, start cutting the branches to get a clean and perfect wood log. After that, start cutting the slices.
As you can see, cutting a log into slices is a piece of cake when you have the best tools in the best conditions. Following the advice of an expert is the best way to save time and money and avoid unexpected accidents.
If you need to cut a tree and you still don’t have the tools you need, don’t waste any more time and find the best options for hand saws and bow saws on the Internet.