How To Cerakote At Home? Need To Know About Cerakote Firearm Equipment

If you’re thinking of adding a new layer of protection to your car or home – or just want to give your existing paint job a bit of an upgrade – then you’ll want to try cerakote! But how to cerakote at home? Do you have any idea?

Well, this durable finish and attractive coating is perfect for vehicles, bikes, patio furniture. And more! Also it can be applied in just minutes using simple tools and different materials. In this article, we’ll show you how to cerakote at your home.

Let’s go for more!

What Is A Cerakote?

A cerakote is an epoxy thin coating composed of ceramic, but the manufacturers didn’t give the full composition of the product. It is cerakote that can coat materials made with metal parts, plastic, polymer parts, cerakoted, and wood. It is truly an innovative way to coat your HVLP gun or automotive PSI or sig blaster as it is not just a thin layer and durable, it is also ‘crazy’ strong.

How Do You Easily To DIY Cerakote At Home?

Cerakote is a durable, long-lasting finish. So it is applicable to any object using a spray gun or pistol. It is commonly used on firearms and military gear. Also it resists corrosion and weathering. You can easily DIY cerakote at your home by spraying the paint onto your desired substrate (wood, metal, plastic) with an airbrush.

For best results, start with a coat of primer first to minimize water penetration. Then apply two or three coats of paint in successive layers until you achieve the desired color and sheen. Cerakote dries quickly. So, you can use it constantly on your project if it is drying.

Video Resource: https://www.youtube.com/watch?v=90bGRCKvQDo

Step by step guide to do DIY cerakote at your home

Well, here is a step by step guide to doing your own cerakote at home:

  1. First, you will need to gather your supplies. You will need a can of cerakote, a paintbrush, and some sort of surface to paint on.
  2. Next, you will need to prep your surface. Make sure it is clean and free of any debris.
  3. After getting ready of the surface, you can start painting. Apply a thin layer of cerakote, and let it dry for 24 hours.
  4. Repeat steps 3-5 until you have the desired coverage.
  5. Let the final coat dry for 48 hours before using the item.

Benefits of Cerakote At Home

There are many benefits of Cerakote and one of the most popular is its ability to protect surfaces from corrosion. It can also be used to increase the wear resistance of a surface, making it ideal for high-use items like tools and knives. Cerakote can also improve the look of a surface, giving it a more finished appearance.

Here are some more benefits of Cerakote at home point by point:

1. Cerakote is extremely durable and will last longer than any other coating that you apply to your firearm.

2. Cerakote is very easy to apply and can be done quickly without any specialized equipment.

3. Cerakote will provide your firearm with a unique look that will make it stand out from the rest.

4. Cerakote is very resistant to scratches and wear, so your firearm will always look new.

5. Cerakote is also waterproof and will protect your firearm from the elements.

What Materials Are Needed For Cerakote?

The official website of Cerakote shared a list of the materials needed to do a cerakote.

Given the below equipment list in detail:

1) Air compressor

2) Water Trap

3) Sandblasting Cabinet

4) HVLP Spray gun (0.8 tips)

5) Curing Oven

6) Spray Booth or Spray Pattern

7) Acetone

Cons of Cerakote At Your Home

Cerakote can be a great option for protecting your firearms, but there are some potential drawbacks to doing it yourself.

  • First, it can be difficult to achieve consistent results when you’re coating your own firearms.
  • Second, if you don’t properly prepare the surface of your firearm before applying Cerakote, it can cause adhesion problems and lead to a poor finish.
  • Finally, Cerakote is a toxic material, so you need to take proper safety precautions when working with it.

Other Equipment List to Cerakote of A Firearm

  • Degreasing Tank
  • Degreasing and Cleaning Solvent
  • Powder Free Latex Gloves
  • IWATA LPH-80 Spray Gun Kit
  • Air Hose or Air brush
  • Duracote
  • IWATA Spray heat Gun Cleaning Kit
  • Cerakote Hook Kit
  • Cerakote Mil Thickness Gauge
  • Sand Blasting Media (#100 grit aluminum oxide or garnet sand)
  • PPE (personal protective equipment)

FAQs- Cerakote At Your Home?

Here are some frequently asked questions about how to do cerakote at your home.

Q: Is Cerakote hard to apply?

A: No, Cerakote is not hard to apply. In fact, it is a very easy product to use and can be done in just minutes.

Q: Can anyone buy Cerakote?

A: No, cerakote is not available to the general public. It is a trademarked product and process that can only be done by licensed applicators.

Q: Is Cerakote easy to scratch?

A: Cerakote is a tough finish that can resist scratches and other wear. However, as with any type of finish, it’s important to take care when applying it so that the paint does not peel or flake off.

Q: How much do cirakote guns usually cost?

A: Cirakote guns can be a costly investment, but they are also one of the most popular firearms on the market. Prices for this gunsmith vary depending on their features and availability, but in general, they cost around $1,000-$5,000.

Q: How to cerakote glock frame at home?

A: To cerakote a glock frame at home, you will need to gather the following materials: a can of cerakote, a small paintbrush, gloves, and a well-ventilated area.

First, remove the slide from the frame. Next, clean the frame with isopropyl alcohol and allow it to dry. Once the frame is dry, apply a thin layer of cerakote to the frame using the paintbrush. Be sure to wear gloves while doing this.

Allow the cerakote to dry for 24 hours in a well-ventilated area. Once it is dry, reassemble your glock and enjoy your new, custom look!

Q: After calling, emailing and searching for companies to Cerakote my Sig P225 I decided since I have painted cars before how hard could it be?

After calling, emailing and searching for companies to Cerakote my Sig P225, I decided that since I had painted cars before, it couldn’t be that hard. I was wrong. The process is much more complicated than painting a car, and requires special equipment and training. I’m glad I found a company that could do it for me.

Q: How to remove cerakote at home?

There are a few ways to remove cerakote at home, but the most effective way is to use a chemical stripper. You can purchase a chemical stripper at your local hardware store. Follow the directions on the stripper and apply it to the cerakote. Let it sit for the recommended time, then scrape it off with a putty knife. You may need to repeat this process a few times to completely remove the cerakote.

I hope you completely understand this regulator formula. If you are paying someone else, first use or must be applied in your gun by using sandpaper.

End Words

DIY cerakote is not for everyone. It is made to be done by professionals.

In this article, we have discussed specific instructions on how to cerakote your handgun, rifle, or shotgun. Cerakoting is a process of applying a durable protective coating to firearms that makes them resistant to rust, corrosion, and other environmental damage.

Leave a Comment