Radon is an air-borne gas that enters the atmosphere when radon-rich soil is exposed to heat and/or water. When it reaches the surface, it can move far and easily through the air, reaching homes far away with high levels of radon.
Homeowner unaware of high radon levels can unknowingly increase their risk of lung cancer and other health issues. As noted in this article, lung cancer is a leading cancer issue for homeowners.
Homeowners should monitor their radon levels regularly to ensure they are reducing their risks of lung cancer and other issues. Regular monitoring also allows for updates to any needed treatment or mitigation measures.
Contents:
Radon fans are very powerful
You might be surprised to learn that radon may be present in certain environments, such as attics, crawlspaces, and mineshafts. This mineral can still enter a surface water source and travel down its system until it reaches your home’s air conditioner or heat vent.
This can occur in places where there is not enough vegetation to filter out the water intake, such as old coal mines. Even in these areas, annual monitoring shows no sign of radon.
Radon is a long-term health issue that affects your breathing. Respiratory disease specialists recommend annually monitoring your radon level to keep up with any signs of disease.
Half of all homes with more than two people are located near a natural gas line. This can create loud appliances and systems, especially for people with high-pitched voices or loudness compensations.
How much you hear radiation depends on your individual characteristics such as age, gender, taste of equipment, and soundproofing measures.
High RPMs cause noise
While fan speed can be changed via the remote, you can also change the fan speed by increasing or decreasing the RPMs. This is due to the motor inside being able to go up or down in speed.
This is due to the motor inside being able to go up or down in speed. When the fan is at low speeds, it uses some energy to move air. While this works, moving air requires a source of energy.
This energy comes from the temperature difference between the airflow and your surroundings. When this situation exists, it may cause your fan to use more electricity than it should.
High voltage causes noise
Radon fans are not the only area where high voltage can cause noise. Radon fans are one area where this can happen!
Because a radon fan is such a powerful device, it needs to be able to function properly. This means that there may be parts that are quality control approved and have enough power to move air!
Some of these parts can end up being very loud. A large part of the power supply that runs the fan is an amplifier that controls how much power is sent to the fan.
Since this part gets spoiled with too much power, it can cause people troubles with noise problems. If you experience trouble sleeping because of your radon fan, you may want to look into replacing it with a quieter one.
Bad bearings cause noise
Radon fans have a reputation for being loud. This is likely due to the frequent use of the fan. If you use your fan often, it will wear down the bearings in it.
This is a problem because when this happens, the fan does not operate as efficiently and generates more radon gas which is unpleasant and annoying.
Radon fans are very cost efficient ways to purify your air because they only cost a few dollars! They are also an excellent way to purify your air during the winter when conventional air conditioning is not available or desirable.
Because radon fans are so expensive, most people don’t fix them until they need them. If you notice that the fan is not working as well as before, take it outside and see if there are any cracks or chips in it.
Loose parts cause noise
While working in a radon testing lab, one of the first things we tell new testing clients is to look for loose pieces in the test system.
Most commonly, these pieces are battery acid, filter paper, filter wrap, and other materials that can cause noise when running.
Because these items are often stored in potentially hazardous areas, it is important to be aware of their presence.
At Radon Labs, we run our radon test systems from computer hard drives not easily corrupted by radiation or human influence. We know what we’re looking for!
Loose parts can also cause headaches when trying to determine if a unit is defective or needs service. If a part needs service or repair, then the owner must purchase and replace the unit in order to continue use of the test system.
Incorrect installation causes noise
When your radon filter is installed correctly, you will not notice it. However, if it is not installed correctly, then there can be some negative effects.
One of the incorrect installation techniques is using a screwdriver to tighten and loosen the radon filter. This can result in a sound or sound effect when it is installed properly. This effect is due to the gap between the filter and the casing of the unit.
This sound effect is caused when there is not enough space for all of the air to enter the case of the unit. This allows excess air from being pushed out, which results in a louder fan and possibly an audible noise.
The correct installation technique used when installing a radon fan is by using a screwdriver. This ensures that all parts are fully inserted, and that there are no gaps that allow excess air from being pushed out.
Need replacement parts? Contact us today!
If you have a Radon fan that is difficult to control or that sounds like a jet engine running, then you should consider getting new parts. Luckily, every fan has its own unique sound and function!
Most fans run on an electrical cord which can be hard to replace. However, most home wiring companies have a replacement part catalog which includes some pretty common parts.!
When buying new parts for your fan, make sure to get the correct size connector.