Braces are a crucial part of orthodontic treatment. They can save or crush your mouth while eating, speaking, and sleeping. Depending on the type of brace you have, this can be a weeklong or yearslong investment in your care.
Braces come in several widths, called widths. There are close-,mid-, and wide-width braces. Each one has its own benefits and applications. For example, a close-width brace may help with lower or tight front teeth that need more space to grow.
A mid-width brace may help with slightly wider front teeth that need a stronger support structure. A wide- Width braces may help with extremely wide front teeth that require additional space to grow.
Contents:
Soft plastic braces
When looking at soft plastic braces, people typically compare them to metal braces. This is due to the fact that metal is the most prevalent material used in today’s orthodontic products.
Most manufacturers use a thin base coating to protect the rest of the bracket from break-down. This base coating is then used to make custom shaped plastic brackets. These custom shaped brackets allow for more precise placement of the brackets on the contact site, which results in faster treatment.
Because of this, steel or metal braces are usually more in length and width than a soft plastic brace. This can be problematic if you have hard time reaching for the bracket. A helpful tip when using a steel or metal brace is to put your hands on either side of it and then move it up and down until it fit into its correct position.
Hard plastic braces
These are one of the toughest types of braces to wear. Because they are so rigid, it takes more time to put them on. They also must be kept in place at all times or they are reminders of what you were when you needed them.
These can be fun to wear! With the right amount of effort, and being careful not to overdo it, you can still get a cute look on your face. Just make sure you have enough time to put it on and take it off!
Some people feel more comfortable wearing hard plastic braces on their bottom because of how secure they feel. Others prefer the look of flat plastic braces.
Tooth aligners
When performed properly, an aligner bracket can help you match your front and back teeth. They are typically used with either amalgam or traditional fillings.
Brackets are typically made out of plastic or metal and are placed in between the two right sides of the mouth. When the correct amount is placed, it then pushes together and down creating a more natural looking alignment.
They can come in various sizes so it is not a problem computer-based system that one must use. Some systems that look like phones or computers but act like a bracket does.
Combination treatments
This is the most popular type of treatment today. It combines various forms of surgery, nutritional supplements, and other interventions.
The best times to undergo this type of treatment is during your pre-operation planning stage, when you are gathering your medical information and understanding of your skin needs. It is also useful once the skin has healed, when you continue to use certain products to promote health and prevent irritation.
Some techniques that are used in conjunction with bracketettes are chemical peels, massage therapy, radio frequency communication technology (rfct), and physical therapy.
This type of treatment can work fast because there are usually just a few procedures performed on you.
It all depends on your situation
There are two main types of countertop orthodontics. The first is the parallel-bar orthodontics style. This consists of two parallel-bar structures that are placed next to each other and then angled slightly inward to create a pocket for the child’s lower front teeth.
The second is the stacked-on-parallel-bar style, where one or more thin layers of material are placed over the top of the parallel-bar structure. This variation can affect how quickly the child can wear their braces.
The third is the wire and cushion orthodontics style. These require special equipment or space to use in most facilities. Therefore, these styles do not get discussed as often as the others.
When applying countertop orthodontics, there are three main things that you must do. You must clean and prepare the area where they plan on placing their braces, you must place a brace on top of each side of the bottom row of teeth, and you must affix a bracket to hold both sets of braces in place.
Talk to your dentist about what treatment is best for you
There are several types of braces. There is vertical, horizontal, or none at all. Which one you use depends on where the gap is in your smile.
Vertical braces are like a longer, higher set of teeth that lean back. This type of brace fits more comfortably over the natural teeth and can add some width to your smile as well as a new look!
Horizontal braces sit over the top of the damaged or misaligned teeth and protect them from further damage. The best example of this type of treatment is Lingual Inlay Treatment (LIT) or Lingual Retention Treatment (LRT).
These treatments take advantage of the fact that when a patient has missing or damaged teeth, the surrounding bone has room to expand and repair itself. With LIT or LRT, this expansion occurs behind the patient’s newly placed denture material. This allows for more healthy growth and restoration of the bones in your mouth.
Braces can correct a misalignment of your teeth
When looking at different orthodontics devices like bracketed or slotline brackets, you can determine whether they are under- or over-the-top.
Under-the-bites are smaller and more precise, while over-the-bites are larger and more overall. In the case of slotline brackets, the bottom bracket is placed below the top bracket to give a wider area of compliance.
Many newer orthodontics use slotline brackets, but not all. Some use bracketed devices, which have a shorter path for the screws. This can make a difference in how quickly your child gains enough height to require slotline brackets.
Your pediatrician can help you find the appropriate orthodontic device for your child.
Braces can improve the appearance of your teeth
A serrated grill-like pattern is created when a tooth is placed on a bracket. This creates space for the new tooth to set in and grow.
A crown is the top layer of metal or plastic placed onto a natural tooth to create a smooth surface and place it on top of the existing tooth.
A crown can last for several years, making it an affordable way to improve your smile. Many dentists will recommend a crown for patients who cannot find an alternate replacement source of teeth or who would like a more custom looking tooth replacement.
When choosing a crown, the height is important. Too high of a crown will increase the risk of rejection (when new material touches old material and causes excessive stress, which causes it to break) or deposition (when new material becomes attached to old material and increases its thickness).
The width of the crown can be problematic as well. A narrow Crown may not provide enough space for growth to occur.