A double bevel saw is a handy tool to have in your arsenal. It can be used for many different cuts and cuts through wood, ceiling joists, concrete, or other material.
Double bevels typically come in a Miter saw housing and stand. The mitersaw housing contains the long axis of the blade that runs parallel to the saw stand. The top of the blade is offset from the stand which allows for easier access to the back side of the blade.
The bottom of the blade is offset from the stand which allows for easier access to the front side of the blade. When cutting on edge, it is important to let it sit out at least a day so that it hardens enough to permit easy removal.
Some double bevels have an extra bevel added on for more flexibility.
Contents:
Double bevel miter saw angles
A double bevel is a very rare angle sawing technique. It has two sides to the blade, and it also has two different bevels on the same tool.
Double bevels can make for a dramatic effect when used with a circular saw, or more specifically, a radial arm saw. With this technique, you can create intricate shapes by making two parallel cuts on the same workpiece, one on each side of the saw.
Using only the standard straight-beveled miter saw, you would need to reverse the cuts to use the double beveled version. However, due to being able to use two double bevels on one tool, this can increase your capacity by up to another four pieces of wood per cut!
There are many double bevel anglessaws available today.
Right 45 degree miter saw angle
There are two ways to angle the miter saw. The first is to place a piece of lumber or wood in the saw’s fence and then turn thesaw so that it is an upright position. Then, we can move away with our hand and easily angle the saw where we want it.
The second method of angleging the saw is to put a right 45 degree angle on the miter saw. This means that you put one side of the saw at an oblong shape and the other side of thesaw is round. You then take your material and cut from this round piece of wood to the oval-shaped one.
This second method requires more skill as you must be able to keep your hand in a steady position while you are working with your Saw Chuck. Doing this will require practice, but is possible once you start working with it.
Left 45 degree miter saw angle
When setting up your left angle saw, you must be careful about the angle you set the fence at. Set it at a 45-60 degree angle to get the most cuts.
This is important because if you set it at a less angle, you would get fewer cuts due to rounds and squares not cut evenly. You would have to adjust your depth of cut depending on how thick the material you are cutting.
Another thing to know about this angle is that when cutting curves, you must be sure to slide the fence back slightly so that it is fully extended before beginning your cut. This will prevent any pushback from happening and give you a better cut.
You can also use this saw on cardboard, wood, and plastic but keep in mind that it may require some thinning or reworking of the material.
What is the purpose of a double bevel miter saw?
A double bevel miter saw is a handy tool to have in the right job. A double bevel saw can be used for cutting two different sizes of material at once.
Double bevels allow you to make more accurate cuts due to the varying thicknesses of the material being cut. When cutting thicker materials such as wood or concrete, a double bevel saw is the best tool for the job.
Most double bevels are around 5-1/2 inches in length when it is standing up on end. When installed on a table top, this little 5-1/2 inches can become a big help.
Can I use a double bevel miter saw for normal projects?
Most double bevel saws are not meant for very thick objects like wood. Most have a max thickness of 1/2 inch.
Because of this, most double bevel saws are not the best tool for most situations. However, when the need arises, such as when building balconies or other areas with very tall objects.
There is a way to use a double bevel saw for almost everything, but it is costlier than using a normal saw. The cost difference is small, but worth it to get the better quality tool.
The best way to use a double bevel saw is to first measure and then cut on only one side.
What are the key features I should look for in a double bevel miter saw?
A double bevel miter saw can be an amazing tool. You can create a smooth transition from cutting one angle to the next, making it very easy to match up your projects.
While most double bevels are around 1-3/8 inches in thickness, a thicker double bevel can still be used. These saws can often cost more than a lightweight model, but they pay off in the end.
A key feature of a double bevel saw that makes a difference in how you use it is the height of the table. Many stock and banking companies now have flat-top models that are higher than traditional round-top ones.
These types of tables have different tips that must be used for leveling projects, as well as different functions for cutting materials.
What is the price range of a double bevel miter saw?
A double bevel miter saw is a very useful tool to have in your toolbox. It allows you to cut two different angles on a piece of wood, making it more complex to cut.
It is also great for cutting through thick materials, like wood. A double bevel saw can cost between $60 and $120, with $80 being the norm.
Many models come with a case, stand, and book-end support built in. This makes it much easier to use as there are no excuses not to look at how to use a saw on the latest model.
Which brands make good double bevel miter saws?
Double bevel saws can be a fun tool to use. When you get them, they will offer you some flexibility in cutting both right and left sides of the same piece of wood.
This can be useful for creating jigs and molds, or working on two different levels. It can also be a great way to add some detail to a project.
Some double bevel saws are geared more for the professional or those with more experience. They may have more expensive versions that are better constructed. For someone less experienced, a single level double bevel saw will work fine.
Generally, those with a lesser degree of double bevel saw will give them some kind of protection against blade breakage and over-cutting.