A vacuum check valve is a device that can be placed in a plumbing system to prevent water from entering a drain or irrigation system when the system is not empty. When the pressure of water exceeds its tolerance, it will come out as a leak!
When checking plumbing lines, fixtures, and trees for summer drought practices such as reforesting or growing vegetables, there is a need for water. By using a vacuum check valve, you can easily determine if there is enough water in your irrigation system or if the plants are getting enough moisture.
A little knowledge and practice on how to use a vacuum check valve can save you lots of time and energy, so take care to learn how to use one properly.
Contents:
Keep fluid from flowing back into the pump
Most water pumps need a little fluid to operate. This includes the diaphragm, or rotor, and the seals that hold it on.
A pump that holds back nothing but air would not work. It would easily dry out and break down fluid such as water or oil to force the water through the pump.
As an added protection, some pumps have a check valve between the housing and the pump that prevents any remaining liquid from entering the housing. This helps maintain adequate pressure in the system around the pump.
If your water pump needs attention, you can test it by pouring some water onto a paper clip.
Help keep a vacuum when using a vacuum pump
When using a handheld or floorstander vacuum, you will need to add some extra vacuum strength to your system. A small handheld or floorstander vacuum will need a slight change in pressure to work the vacume pump.
When using a standard sized household vacuum, such as a Canister or FX series, you will need a powerhead. The powerhead will be unable to work the vacume pump without it.
Canister and Standard Size Vacs do not belong together like Handheld Vacs and Vacuum Pumps do. Handheld Vacs and Vacuum Pumps belong together.
Are found on double-acting pumps
Most double-acting pumps are visually identical, except one is located behind the valve and the other is located in front of it. These differences determine what a technician needs to check when working on a pump.
The location of the check valve in front of the pump determines whether or not a technician must use a special tool to remove it. Some technicians must use an extensions kit to properly reach it.
The location of the check valve behind the pump determines whether or not a technician must have it removed without an extension. If no extension is needed, then simply walking around it can be used to remove it.
Make sure fluid does not flow back into the pump
If the washer leaks dryfluid or washing powder, a valve called a vacuum check valve can help prevent this.
A vacuum check valve is a small hole in the wash tub that lets some of the water stay in the tub while washing. When the wash is finished, it disposes of the broken down material in a garbage can outside of the tub.
By creating a small hole in the wash tub to hold some of the water, this helps prevent material from climbing into the motor and motor housing. Another advantage to having a vacuum check valve is that it can help protect your washer from house Hazmat accidents.
If your washer has an automatic defroster feature, you should take care to set this correctly.
Check valves are usually smaller than the pumps they are used on
They are used to prevent water from reaching a large amount of space when a system is working. Check valves are usually about the size of a thumb hole.
These types of check valves are typically placed in large systems to prevent significant flow damage. When a system is working, the pressure in the system can help keep the check valve closed, preventing water from coming into the system.
However, when checking the system, sometimes it needs to be opened and restocked with water. This can be timeconsuming and expensive to do every time you need water. With check valves, there is a small amount of pressure that needs to be maintained on it.
Check valves are usually made of metal
This material helps protect the system from back-pressure caused by a vacuum in the system. When this happens, the check valve prevents too much water from entering the system.
When water enters the system through a hose, it passes through this check valve before entering your house. After passing through the check valve, there is no more water passing through it.
This helps protect your home from any excess water that might occur during a Vacuum Check Valve replacement. A backup plan is having a backup vacuum check valve in case the first one fails.
When you have a problem with your vacuum check valve, you must have it replaced as soon as possible to prevent any damage to your home.
Vacuum check valves help keep a good vacuum in the chamber or cylinder they are used on
When you fill a cylinder or chamber with air, it can sometimes pull too much pressure into the chamber or cylinder and push out too much air. This causes the air to be forced out at a lower pressure, which is how you know there is more air in the tank!
This occurs because less air equals less force equal less vacuum. When this happens, you need a valve like this to close the hole back up so more air can flow in and replace it.
A vacuum check valve does just that. It closes off the hole on one side of the tank when there is not enough pressure on the other side to keep the air from pouring out.
This prevents leaks, save your money for future projects, and helps bring back that full feel that your salt water tincture was supposed to create.
They are very important in keeping your pump working properly
When the tank level is low, the pump can not get enough air to work properly. This can result in dust, dirt, and bacteria being forced into the system.
When this happens, it may result in poor water flow or overfilling of the system. These conditions are highly undesirable as they prevent other parts of your system from working correctly.
To prevent this from happening, you must have a sufficient vacuum check valve in your system. This prevents too much water from passing through at one time and increases awareness of system pressure.
A vacuum check valve helps to create a greater awareness of system pressure which helps to prevent overfilling of systems. When this happens, the tank will lose pressure and foam will not flow properly.