In case you have been living in a cave for the past few years, automatic transmissions are an amazing technology. It has been around for nearly a century, and has only been making a comeback in recent years due to its positive effects on cars and driver composure.
The term automatic refers to the fact that it does not have another gear marked in its transmission. This means that the driver must hold down the shifting paddle until it is properly placed in one of the two positions- fully engaged, or off-line.
When this happens, the transmission will not change gears automatically like some manual ones do, but instead it cancels out some of the power from the wheels as they rotate through new gears. This helps preserve traction and smoothness on pavement and off of pavement.
This can help prevent tires from wearing down or shifting out of position which could cause trouble with traffic or terrain.
Contents:
Automatic transmission benefits
Most people are surprised to learn that almost all heavy-duty truck manufacturers offer an automatic transmission. This is an impressive list of transmisisons: Ford, GM, and Fiat-Chrysler!
These transmissions offer the benefit of being able to change gear ratio without touching the pedals or using the shifter. This can be a blessing and a curse.
The curse is when you have to hold the transmission in gear mode for five to ten seconds after changing it out to put it into manual mode.
Selecting a truck with an automatic transmission
When looking at trucks with automatic transmissions, there are several key things that you should look at.
keynote icon When looking at trucks with automatic transmissions, there are several key things that you should look at.
Blind spots can happen quickly. Having the ability to easily shift into a lower gear or a higher gear is important when going through town or during an emergency situation.
In terms of performance, having a truck with an automatic transmission can make a big difference. While not much difference in performance can happen, having one can help save some money on gas as the truck will just shift into gears when needed.
Another point to look at is ride comfort. Does the truck feel soft or firm? If they have hard plastic seats, then do you want smooth or sharp edges? These questions and answers can help find the differences in comfort between trucks.
Understanding auto transmissions
A transmission is the mechanism that changes the speed of your car when you drive it. There are two major types of transmissions: ale-auto and planetary.
Most vehicles today have a planetary automatic transmission, which changes gears using a long rotating shaft called a gearbox. These transmissions can be very smooth or hard start depending on who makes the vehicle. Some have warning lights to indicate operation, such as when changing gears into second or triple digit miles per hour speed.
A smooth automatic transmission has five thin disks called ring gears that rotate with the shaft. These ring gears prevent heavy metal pieces from moving around inside the transmission, like in an old manual transmission that might shift by grinding against one side or bumping against another.
Old trucks might have manual transmissions for several reasons: not enough power, too much cost factor, and/or not enough security, because someone could just change a new auto trans with a new one and vice versa.
Different gear options
While most truck engines are equipped with a low end and high end gear, there are different choices available for drivers. For example, some engines have higher ratios for low and lower ratios for high, or none at all.
This is called variations in design. Variations in quality can make a difference in how your truck drives. Some drivetrains have one of two speeds, making certain grades of quality needed were available on every model truck.
Some have three or four speeds, depending on which models you get. This is an area where good craftsmanship can make a difference in how your truck handles and looks!
As mentioned earlier, some engines have two or three gearboxes.
What should I look for in a truck?
When it comes to the best trucks in the world, there are many different ways to choose the one you want. There are large, heavy, powerful vehicles for rough terrain, and light, maneuverable vehicles for daily use.
Neither one of these two mainstay vehicles has ever used an automatic transmission, so there is no comparison. However, if you wanted a small truck or a maneuverable truck with little cargo capacity, an automatic would be fine!
The biggest downside to having an automatic is that you must pay attention to the gears every time you drive; you do not get either of these benefits with an auto. The other major downside is that you must take special care when shifting because the gears do not always shift exactly into place.
Bullet point Brittonte Family Fergusons offer a full range shift mode to help ensure your driver and passenger can still take advantage of this feature when driving with this mode on.
Does it have a push button start?
If not, you may be in trouble. There are a few things that automatic transmissions need to work and do correctly to keep your business.
A transmission needs to be well-cooled. If the drive motor is not very powerful, it will not function properly. A well-cooled transmission can be problematic when it comes to shifting, especially if it requires a lot of torque to operate.
When attempting a shift with a non-synched car, there can be some play in the shifting action. This can make the car move around as it tries to shift, making you feel like you are getting nowhere fast. If this is what you are looking for, then truck companies with an automatic transmission is what you need!
An automatic transmission should require little maintenance.
What is the mileage on the truck?
Having an automatic transmission allows truck drivers to save on fuel compared to driving a manual transmission vehicle. Because the transmission moves the gears with power from the engine, it requires less fuel to move it into a gear than someone with a conventional transmission.
The downside to the automatic transmission is that it requires oiled and aligned parts. If your truck does not have an auto, then you can still save money on oil by using aqueous racing lube instead. It costs more money up front, but alivelier vehicles need less oiling and maintenance.
So, if your truck does not have an auto, there are still benefits! The driver can still save money by not going through the futile of trying to shift into a gear and moving the car forward or back using the clutch.
There are many truck companies that offer both an auto and non-auto version of their vehicle. The main difference is in how much clutch pressure is needed to change gears.
Does it come with a warranty?
A warranty can be helpful when transitioning from regular to automatic transmission. If the transmission fails while driving, it can be helpful that the truck has a warranty.