The flush valve is a critical component in an automatic kitchen sink set up. It controls the flow of water into your kitchen sink as you cook, wash, and bake!
If it does not function correctly, then you will need to change it out. There are many ways to fix it so do not worry if you see no fluid coming out or no operation. It will still work!
Bullet point: Parts Can Be Cheapened Here and Thereheimcerningchangesis!heimcerningchangesis!heimcerningchanges
Bullet point: One of the most common problems people have when fixing their set is buying new parts that are not made in the same factory as the other parts.
Contents:
Verify that the battery chamber cover is tight
If the battery cover is open, then your flush valve may be loose. If the flush valve is in, then the water flow is correct.
If the flush valve is not working, then you need to verify that the battery cover is closed and that the removeable battery is seated into the tank. Once that is verified, use a screwdriver or something similar to make sure water flows out of the flush valve and into the tank. If so, congratulations! You have fixed your problem.
If not, then you must make sure that the flange on top of yourflush valve is seated tightly against the top of the tank. If it isn’t, then you need to figure out how to fix this problem.
Replace the battery chamber cover
When your flush valve starts to leak, you may notice a slight sound or smell. This is the flush valve closing and opening to expel water.
If this happens while you are flushing, wait until the water has stopped flowing before attempting to open the cover. Once it has opened, try removing the cover to see if there is any water coming out. If so, replace it immediately!
When flush valves are replaced, it is important that the new one is compatible with the old one.
Replace the battery
If none of these solutions fix theé—ść°´é—ś, then it is time to replace the battery in the valve.
While there are many ways to maintain a flush valve, such as cleaning it once a week with a water attachment, there are also commercial products that can help. There are many brands of battery and some must be replaced yearly while others can be replaced as needed.
To troubleshoot the Automatic Flush Valve, you first need to remove it from your toilet. Then you can plug in your toilet and check the float arm for movement, if it does you have a blockage.
Run water through the valve to clean out debris
Another way to check the flue is to run water through the valve for a few minutes after it rainshower seasonally and then again during the dry months of the year. This can help determine if debris has clogged up the valve or not.
If there is a problem, then check both outlets for leaking and repair accordingly. If there is no problem, then nothing should be done.
Sloan valves are usually warrantied for life, so if you change sizes or add a backup, you do not need to worry about running out of water or losing control of the flue.
If something does break, check out ReplacementValves.com or eBay to find a new one quickly! They have great customer service and quality guaranty.
Check all connecting parts for damage
If your flushing valve has a gasket, make sure it is in place and not leaking.
If the flush valve uses a hose, make sure it is not broken. If the hose is connected to the sink or toilet, make sure it is not frozen or breaking off of the connection.
If the flush valve is mounted to a cistern or tank, make sure it is not cracked or damaged. If there are checks on the flush valve, these may be natural and correct.
If any of these problems sound familiar, try turning your water on and off for 30 seconds to see if anything changes how cold or hot you want your water.
Check pressure setting of valve
If your flushing valve appears to be working at low pressure, check the setting of the flange on the valve.
The flange should be fully compressed before starting the flush process. If it is not, then you need to add water to make up the difference.
This is proof that your valve is functioning properly and adding water will take itirus away. If not, call a qualified plumbing professional to unclog your pipes.
If you are using a diagonally mounted flush valve, then look for obstructions such as rocks or furniture before adding water.