A treestand is a convenient way to hold a musical instrument, play a few basketball games per week, or simply relax in an illuminated room with music and fun games. A treestand is typically mounted to a ceiling or wall with a mounting bracket.
Because of this, many consider treestands to be extensions of their homes. You can mount your treestand anywhere, as long as you have a mounting bracket! This can be beautiful or annoying, depending on your perspective.
Trestles are ideal for small-to-medium sized homes, as they are easy to set up and take down. Many people purchase their tresdens around Christmas time, when family members are holistically looking out for one another.
Contents:
Purchase a harness
Most treestand companies will sell you a treestand that comes with a harness. The harness transmits weight and force from the tree to the user.
Put the harness on
When you’re ready to make your treestand stand, put on your lifeline. The lifeline attaches to the top of your tree using four adjustable knots that connect the two.
Put on a pair of sturdy shoes to protect your feet from the ground. Also, keep in mind that these shoes may be warm because of the tree trunk.
To use, step down off the trunk and wrap your foot around one end of the shoe. Then pull up the other end and wrap your foot around it. Put a couple of books or a familiar book to put you in a self-comforting mood as you take your stand.
Put on earplugs to help you hear what’s going on below so you don’t have to look down at the trestand.
Thread the cord through the tree stand
Once you have your treestand lifeline, the next step is to thread the cord through the tree stand. This allows you to hang your tree stand, and makes it easier to move your tree stand when needed.
You can do this in several ways, but the easiest is to start with two pairs of elastic-waistband lengths of cord. Take one pair of cordslengths, and knot one end snuggly around a sturdy branch. Take the other pair of cordslengths, and then pull them apart slightly until they are free.
Now you can hang your tree stand! Make sure to account for wind and weather when designing your treestand lifeline. A weak link could cause your tree stand to break or collapse under the force of those elements.
Make sure to keep an eye on your tree stand as the day goes on, it could loose support or need replacing.
Make sure there is no slack in the cord
If the line is already connected to the back of your chair, then you are all set! If you have to make a new chairline or floorline, then do it! You want your lifeline to be as tight and strong as possible to keepfeedingyourseas.
If you have to add a new level of comfort or convenience, add it where it will help you keep hold of the tree. For example, a leaflet holder could work nicely. Or maybe an ergonomic grip would be more comfortable and helpful.
Make sure the tree is stable enough to hold on to. A little bit of push from my hand or from someone pulling on the tree can make it fall over if it is not sturdy enough. Make sure there are no sharp edges that could hurt yourself or another person.
Clip the carabiner to the harness
Once your climber is safely on the ground, it’s time to clip the lifeline to the harness. You can do this by removing the plain carabiner and clipping it to the lifeline using a standard carabiner instead.
As mentioned earlier, you need to make sure that your lifeline is long enough to reach from one side of your climber to the other. A short length of lifeline will not allow you to connect the two parts of your climber.
Once attached, let go of the safety release and climb! You will hear a click as the safety mechanism engages, saving you from any unfortunate accidents.
Check your setup regularly
Having a stable and secure place to stand or set your lifeline is the first step in making a treestand. You can do this either before or after you assemble your platform, but not before!
At any time, you can check to see if your lifeline is level with the ground or not. To do this, walk with your platform on its wheels and then walk up and down the steps. If it moves easily, you are good to go!
If it does not move easily, take it outside and let the wind and weather work with it. Once they determine it is safe, put back in place!
Never force anything into or out of a tree when it is still unsafe.
Always use proper safety gear
In addition to being aware of your local regulations, you can also ensure your safety by always being prepared. This includes wearing a safety helmet, appropriate protective gloves, a sturdy pair of work boots, and a heavy winter coat or jacket.
Never wear shorts or a tank top under a coat or shirt, even during warm weather. Always have footwear covered by the winter wardrobe?said.
And if you are not required to be clothed in the safety gear listed previously, then do so! There is no point in being safety-conscious and wearing nothing but shoes with no pants because of the heat condition.
You can also save money by purchasing Safetyeline products compared to buying them with out-of-pocket costs. Safetyline products are always quality made and designed for use in hazardous environments.
Keep your stand clean and well-maintained
Your treestand should be as clean and well-maintained as your roofinghams should be. A treestand is a ground-based structure used to hold a audience while you teach your class. Your students can learn a lot from your work, so take care of your stand!
Your stand should be inspected before each lesson to make sure it is in good condition and meets National Cooperative Treestand Development (NCTTD) standards. You can get an estimate of how much money you will save by checking with the local treestand board or club.
Checking the stand every week or two will also give you time to give feedback on each student’s work and see any problems. If there are problems that need fixing, then you can do that right away!
Finally, take care of yourself! Class is hard at times and having a good environment to work in is very important.