Making your own paper shoes is a fun way to spend a few minutes in. You can do this almost anywhere, as they are very easy to make. They are also a great way to boost your self-confidence while making the craft.
Making paper shoes is not only limited to sports, but also for fashion or non-sports. Many people use them as a form of pain relief, due to the slight discomfort and delay in putting pressure on the sole.
The process is mostly done with a manual dexterity; some people can do some pretty well with little experience. Being able to work with angles and presses can help increase skill level slightly.
Contents:
Find some tape
If you are looking for a more advanced paper shoe routine, you have some locales to go to. There are a few clinics that offer this service, but it is not required. You can do the routine on your own!
There are a few ways to make tape diecutters. The most common is to buy one that is packaged and has pre-made cutouts and tapes. These usually cost more than doing it yourself, but still very affordable.
The second way to make tape diecutters is to use some regular old paper. You can find these at the grocery store or supermarket as couponing supplies. Just make sure the paper is thick enough to hold your tape together!
The last way to make tape diecutters is just use them yourself! If you are feeling creative, try using distress fabrics or ones with beautiful textures for your taping surfaces.
Put the shape of a shoe on the paper plate
Now, draw a line that is parallel to the edge of the plate, and then slide the paper shoe onto the line.
Put your other hand behind the shoe and pull, creating a sliding motion to insert the shape into place. This takes some practice, so do not be worried if you do not get it right the first time.
Once inserted, let go of the hand and he or she can walk on their own! This trick can be used for drawing shapes, painting pictures, or simply making something look more like a shoe.
Cut out the shape of the shoe
Once you have your feet shaped, it is time to cut out the shape of your feet. You can do this by using a paper shoe shape, or one of the many toe-shaped templates that come with shoe fashions.
Once you have done this, you can now print and cut out your new shape!
Then, go ahead of time and add some glue to the bottom of your foot to keep it in place, and let it set up for an hour or so before wearing. This will make your feet look much nicer and be even more comfortable.
Tape the sides together
Another tip is to tape the sides of the shoe together. This is great for those nasty wet weather days! You can do this by putting a narrow strip of tape on each side and then taking your foot and ankle and placing the foot in the shoe.
Once that is done, then you can put some strong glue or hot-dappled glue on the strips to tape them together. These worked for me in conjunction with my other tips, but you may use them by themselves too.
Bullet point: Use thick glue
The last tip is to use thick glue.
Put your foot inside of it
When you want to walk in a certain direction, you must keep your foot on the foil. If you put your foot away from the foil, you will have to walk in a circle until you can get your foot back on the foil. This is called walking in a circle
When you need to run away from someone or something, the way to avoid being caught is by doing paper shoes. When running away, keep a soft landing spot for your foot and make sure it is fully relaxed.
If your shoe gets caught in something, you can remove one toe and then pull down the other end of the shoe to let yourself free. This will allow more movement of your legs and feet while running away.
Adjust how it feels on your foot
When you dance on a paper shoe, your foot creates suction to the ground. This creates a different feeling on your foot.
The harder you dance, the more pressure your foot makes on the surface. This is due to the hard layer beneath your toe box. This is what creates the hollow sound when you walk on it.
We all have different sizes and shapes of feet. Some people are more comfortable in a narrow or extra-long shoe. If this is you, then get a larger size!
How do you make your paper shoe? Simply take an old pair of shoes and fold them over at the bottom. Then, take one block of strongly padded cloth and wrap around top of shoes to create a sock-like cover.
Hold down the front to keep it on your foot
Then, slowly back away until your heel is able to hold the paper shift
How long it takes depends on how far you have to back away. This trick works for classic and vivienne wayfarene shoes.
You can also do this with closed-toe shoes such as leather or rubber ones. These kinds of shoes typically require more time to make the shift.
If you are having trouble making the shift, try working on one layout at a time.
Walk around in it to get used to it
When you want to make a new skill, you must learn how to do something once before at the start to get used to it. This is called taking the time to get into the flow of what you need to do next.
In order to make your own paper shoe, you first need to learn how to walk around in a kneeling position. This is where your body is in itsest Position, or pinning position. This is where you are able to create the shape of your foot and toe.
The easiest way to learn this new skill is by doing some practice shoes. Start with a soft leather shoelace and wear him out until you can walk around in a kneeling position without bending your knee or pinning your feet together.