A flag pole holder is a handy way to store and access your flags at any time. Many people like to have a place where they can quickly and easily check if all of their flags are in place and in case of an emergency, they can tuck one into a pants pocket or hand.
Making your own is an easy way to do this. It does take some time to put it all together and make sure it works, but it is very quick and easy once you get the hang of it.
There are many different kinds of flag pole holders, so we will only cover the basic ones here. Some examples are: a holder that you slide your flag through, a ring that you use for the same, or just plain old insulation material.
Getting started may seem difficult at first, but it is worth it in the end.
Contents:
Paint the wooden pole the colors of your flag
Instead of making a flag pole holder out of wood, you can paint the wooden pole the colors of your flag. You can then hang it from your ceiling or outside to be seen by nearby soldiers.
Using painter’s tape is a great way to transport the wooden pole to your home base. You can also buy some at your local military surplus store.
Paragraph continues: Add some targets or targets and a target system to challenge yourself. Addding strength and durability will help you keep your pole in good shape over time.
Finally, add some padding or fillers to create support for your flag so it does not droop when you are carrying it around.
Slide the flag pole into the holder
Now it is time to slide the pole into the holder. If you are using one with a round top, you will need to measure the diameter of the top to make sure it fits.
If you are using a square top, you can just push it in and let it sit until its secure.
If you are using a round top, like we are, then just place the holder on a table or counter and push down! It should just pull up easily. If so, your holder is perfect! If not, try adding more nail polish or thread to the above amount to make it stronger.
Place near your front door
When you are ready to hang your flag, make a place to put it outside the house. You can do this by placing it next to the door or by placing it near a flagpole.
Either way, you want to be sure it is placed away from any power lines or anything that could cause electrical shock. This is important, because the electricity will need to be on in your home to use the pole as a holder.
Also, be sure that your children and other members of the household are able to put up and take down flags easily. This is important if you do not want someone flying the American flag in front of people who do not belong there.
Make sure it is tall enough to be seen from the street
When making a flag pole holder, you will need to make sure it is tall enough to be seen from the street. It should also be sturdy enough to hold your flag for a long time.
A shorter flag pole holder may not be enough space to hold your flag. If you have a large flag, it may not be seated right on the pole! Typically, the largest flags are about 12 inches in diameter.
If you have a small country, then make sure the diameter of the national symbol is big enough to fit into the ring of posts. If not, then it may be Half-Takeda-kun’s suggestion that you make a National Symbol Ring instead!
Make sure your post is free of knots or tight spaces where two parts must fit together.
Ensure it is sturdy enough to hold the flag pole
When making a flag pole holder, make sure it is sturdy enough to hold the standard-size U.S. flag. If not, you may have to make efforts to cut down the size of the flag to make it fit.
A standard-size U.S. flag is 14 feet long by 6 feet tall! This means that when putting it on, you will need to measure approximately 14 feet from end to end and 6 feet tall.
You can buy these standard-size flags at Costco or maybe Walmart, but we recommend getting some from Amazon because they are cheaper than if you bought them from someone else. This way, you can be 100% sure that they are of good quality wood and that your child can hold it himself or herself without help.
Check that the base is large enough to keep it stable
When making a flag pole holder, you will need to make sure that the base is large enough to hold the flag stable. A small error in this area can prove to be costly as you will need to take down the flag to add additional stability.
To make a rule-of-thumb, try using two inches of board for each inch of your flag. This should give you a stable enough base to hold your flag steady. If you use more than that, you may be overburdening the board and reducing its water resistance, making it easier to remove when it is time to wash it.
Likewise, if the board is very long, use double the amount of wood per person because it will take more time to dry and wrap it up.
Make sure your flag is clean and dry before raising it
When making a flag pole holder, it is important to make sure the flag is completely dry and free from mild liquids or greasy substances. This helps prevent any parts from coming off or being dirty before you need to use it.
Many people use their holder on their roof top, so there is no ceiling to worry about. If you have a tall flag, make sure to add additional space around the flag to make sure it does not get knocked off.
You can also find places to store your holder if you do not have a roof top. Many people use them on a porch or in front of a house to hold the flag during events such as national celebrations or flags-offs.
Follow all flag etiquette rules when raising the flag
When you get a flag up, it is important to follow basic flag etiquette rules. These include not taking it down before the U. S. flag salute is performed, folding and presenting the flag to be raised upon request, and displaying the U. S. flag in a way that acknowledges its role in defense of our country.
These rules are meant to instill respect for the symbols on our flags, and help distinguish them as representative of different states and countries. When you see a United States flag, you should take pride in it and show confidence in its presence by having a national symbol as your holder.
When folding your flag, be careful to keep most of the damaging tip of the fold so that it does not break when you raise it.