Tuckpointing is a furniture-making technique that creates a raised, smooth surface on a furniture piece using paper or foam pieces stuck together. It was originally created as a way to hide old glue and/or paper used in the production of furniture.
Tuckpointed furniture has gained popularity over the past few years as it is an easy way to show off your interior design ideas. Examples include dining chairs with wood veneers and Restoration Hardware-themed pieces.
This article will talk about how to do tuckpointing on a dining chair, but similar techniques can be used on other pieces of furniture.
Can Tuckpointing Be Done in Winte?
Yes! With the right amount of tucking, removing, and mixing of foam and paper pieces, anyone can do tuckpointing! There are many online sources where you can learn this craft easily.
Why do homeowners winter tuckpoint?
A tuckpoint is a specialty lumber installation technique that uses special timbers to create a tight, deep, and long concealed installation. This method is well suited for high-end homes because it allows the homeowner to put more space into the home!
Using a tuckpointing method means you match the length of your lumber with the thickness of your lintel or floor joists. You then nail or screw these items into your home to create an install.
The final step is to fill in the gaps with siding or paper according to the settings of your home. This may include adding interior doors and/or an outside door!
Many people use tuckpointing for aesthetic reasons only instead of working in woodworking.
Can I hire a professional?
Only if you are very wealthy! Most people cannot afford the services of a professional tuckpointing professional. However, you can do it yourself!
The answer is yes, you can do it yourself. In fact, many companies offer their customers the ability to tuckpoint their own furniture. It is a nice touch that adds value to your home.
Tuckpointing is a process where a skilled craftsman or woman uses pointy tools to put tiny grooves in the wood and/or foam used in your furniture to help it hold its shape.
The best tuckpointers can come very close to perfecting the process and being able to do it on their own.
What material should I use?
There are several main materials that can be used to tuckpoint. These include wood, foam, textured surfaces, and linoleum. Each has a different properties that makes it ideal for tuckpointing.
Wood is typically the first material selected when exploring tuckpointing. This can be done using natural or synthetic materials like bamboo or particle board. Because of the material nature uses, there are many ways to use it in your tuckpointing.
Synthetic materials like foam can be used as well, just not as extensively. Again, this must be checked to see if it is soft or hard. If it is the latter, you will need a difference in thickness to apply the foam over the top of the floor.
Last but not least, there are some surfaces that can be tuckpointed on.
What if the original brick cracks?
If the brick in your new construction needs to be tuckpointed, there are a few ways to do it. The most expensive way is to use a jig saw and cut along the entire length of the brick.
The second method is to use a chisel and extend the corner of the brick. The third method is to use a router and create a pocket of mortar around the brick.
These last two methods are easier to do on computer-controlled machines. An experienced woodworker could probably do these easily, but first-timers may want to look at some of the free tutorials on line.
Will winter tuckpointing cost more than summer tuckpointing?
winte is a special technique that allows you to reduce the depth of snow on your roof. By tucking the snow under your roof, snow can be reduced and protected.
Using winte, or white pointedroiseaux, snow can be placed under your roof. This adds another level of savings as you do not have to purchase new roofs every few years due to weather damage.
Some roofs are more suited to winte than others. Some people can tuck their own snow very easily while others may need some help.
What if the weather delays my project?
If the weather is preventing you from doing your tuckpointing project on the same day that you request approval from the building review board, there are ways to get your project underway.
You can call ahead and let them know that you would like to do your tuckpointing in winter, or you can send an email noting this delay.
If the building review board grants your project approval, they will usually allow a few days’ advance notice for construction. If this is the case for your project, then try to make it up to them by sending them a quick note letting them know what time you would like to work and what type of equipment you have!
Another way to get started on your tuckpointing is by doing some preliminary work such as laying down wood shims or determining where jointing will occur.
Who should perform the work?
Most well-known for their work on luxury cars and high end furniture, Kreg is making a big impact with their new product. The Tuckpointing Tool is a little disk that you place under your mitres to add depth to your cabinets.
You then use the disk to mark where the corners should be and where the shelves should be. Once you’ve marked all of those places, you can easily slide in the disk and start tuckpointing!
The tool costs $30 and can be ordered online here. You can also buy it at some hardware stores too, just look for tuckpointing tools.
Do I need to remove any existing mortar before repointing?
Most conventional wisdom suggests that you remove some existing mortar before attempting to repoint. This is due to the fact that new mortar can cause cracking and/or breakage in places where it passes through prior to being absorbed.
However, due to a lack of national regulations, most homebuilding stores and building supply stores offer Tuckpointing as a free product. Thus, it is not uncommon to find new homes with Tuckpointing on the frame.