Tall boots are a stylish way to go for a shorter height requirement. They can be pair with skinny or long skirts, or a longer top. The length of the top can be either longer or shorter in this article.
The best way to wear tall boots is to get the correct size. If you do not have a size small in tall boots, then get a size large because they are always on the thin side.
Size large boot usually means there is room for a thicker sock and maybe even an extra pair of shoelaces.
Contents:
Place cardboard in the bottom of your boots
This method is for tall boots that need a place to sit on top of the boot tree. The boot treefeature two levels: one for dress shoes and ones for boots. With this method, you can place your regular-height shoes on the lower level, and taller shoes on the higher level.
The trick is to choose which height of shoe you want to put on the tree. For example, if you have a low-heeled leather boot with a high-ankle length leather shoe nearby, put the ankle length shoe on the lower level and the low-heeled leather boot on the higher level.
Why This Works: By having two levels, you save space in your closet! You can also use this if you have many same height shoes because one will take up less space than several with different heels and sizes.
Place rolled up newspapers in the bottom of your boots
This trick prevents your shoes from getting dirty, and it makes it easier to move around in the kitchen or bathroom with your boots on.
When you need to clean your boot tips or the bottom of your boots, you can simply roll up some newspapers and put them in the bottom of your boots. This acts as a cushion to prevent them from being bent during moving around.
Place socks inside of your boots
If you wear thick socks, you can place them inside the boots to make it easier to pull your feet in. If you use thin socks, you can put those in the boots as well.
Otherwise, if your feet are normal height, leave enough space between the boot and foot to allow for proper foot placement. If your feet are very tall, make sure there is enough space to fit your foot inside of the boot.
Boots are a great way to do some dress up as they look nice and keep you warm too! If you want more health-related benefits like climate control or comfort, then buy winterized clothing!
Featured tip: When polishing the leather of the boot, remember that when cold weather comes, these boots will be exposed to water and snow. Take care of them to prevent water penetration and snow accumulation.
Use a boot tree to keep them straight
When trying on tall boots, make sure they have a good boot tree under them. If not, the boot will be forced down when you walk in them. This will make the boots look funny and create a bigger step to put your foot in.
A boot tree is a piece of material that is placed under a pair of shoes to keep the foot at an angle when standing. When this is applied to a shoe, it creates more space for the foot to move around in.
When buying a boot tree, look for two things. The first is how tight the wood is and the second is how high it is. If it’s very loose, it won’t help keep the feet straight when walking.
Use a rubber band to keep them straight
When you pull your tall boot up on top of your foot, you will need to use a few extra steps to keep them aligned with the boot tree.
First, take your rubber band and wrap it around the top of the boot just below the heel. Then, draw a line down the length of the boot and hold it there with your foot attached.
Using a shoemaking tool or another match-sized object, measure off a bit of this line and then cut. This will reveal a slot to fit the tree.
Now, use some strong glue or kindred material and connect the two pieces of wood! This will ensure that your boots are stable as it holds its shape while you work on keeping it in place.
Put them on a flat surface that won’t move
When you are standing on one leg to put them on, make sure to place your foot on a soft, stable surface to place the boot on. This way, your boot won’t move when you raise and lower your leg to put them on.
You can also hold a book or magazine under one foot to help support the boot and prevent stress on your ankle.
Put the boot gently in the suggested direction of the leg until it is snug. Then go back and add some tape just enough above the ankle to cover up any loose material.
Finally, let them dry fully before wearing them! If you are having trouble with holding them up because of size or weight, get some help from our recommended Boot Tree for Tall Boots article.
Mark the heel with a pencil or marker
This one is a bit tricky! You cannot write or mark the heel of a tall boot with this tip. You must do it before you put the boot on!
How to Mark the Heel of a Tall Boot
You can do this two ways. You can use an everyday sharpie, or you can use a hot melt glue. The second way is much more effective, but it requires more precision and skill.
The best way to do this is to draw a line just below the top of the boot and then write your glue on top of that line. You must keep an eye on your glue as it sets up so that you do not break it pushing down on the boot.
Keep them upright when not wearing them
Most people keep their heels upright when not wearing them. This is due to the fact that if they were to put them on with the heels at the fore, they would fall off.
With this method, you have to take the time to let the shoes hang down after you are done with your calibration. With our Tall Boot Calibration, you can relax and boot up and down in minutes!
You have two options for keeping your feet upright while standing: One is to place a little bit of cushion under the heel and against the floor, or hold onto something if you need help doing it.
Our other method is to put some ankle weights. Just get ones that are about half your weight, fold them up, and give them a good shot! They will work in about an hour! These will help you stay upright while working out or just standing around doing nothing.