When the transmission is in drive, if you have a panic bar or rear-end assist, the transmission will shift into neutral or park mode. If there is no automatic override, then you can still shift into reverse if you hold down the shift knob during this time.
This is useful if you have a heavy load that needs to be carried out or if you have another vehicle nearby that can assist You can transfer your car to the other driver without having to start the transmaion over again.
There are two ways to get automatic revers e: manually and via a button on the steering wheel.
Contents:
Reset your transmission computer
Sometimes, the transmission only goes in reverse when you need to go forward. If this happens, do not risk putting anything else in the car into neutral or any other direction because the transmission will stay in reverse and continue shifting until it finds a piece of metal to pick up on.
This can be problematic if you want to shift into another gear as soon as you put your foot on the accelerator. If the transmission only shifts into reverse, you will have to start shifting again before you can put your foot on the gas!
A common problem that causes this is a worn out transfer case. Other problems may include weak springs or contactors, or even a misaligned drive gear.
Check for a faulty shift cable
When shifting into a reverse gear, the transmission has to move back in its housing before the shift cable can be moved out. If the shift cable is movement when you press the shift button, it will need to be shifted into the new gear.
This is due to the Shift Cable Only Goes in Reverse feature. When this feature is enabled, it needs to be moved forward before it can be moved into place. Once this happens, you will only move one gear and then wait for another one to move before you can go another step down in gearing.
Checking for a faulty shift cable is also checking for any signs of heat or steam coming from it. If you see any of these, take it back immediately! It could very well be broken.
Check for loose gear shifter
Changing gears is a fun, adrenaline-pumping experience. You press the shift button and then moments later you shift into that new gear.
Contact your local auto repair shop
Some trucks have an automatic transmission that only goes in reverse. This is rare, and a local auto repair shop can determine if your vehicle has this feature.
If you have the automatic transmission only going in reverse, your truck needs to be professionally changed into a automatic transmission so it can work!
However, doing this yourself is not the best idea. A automated transmission may not move the truck very well, and there may be problems with finishing or durability. If you want to try this out yourself, read read online for some tips on how to do it.
Local auto shops can test the reverse gear of your truck to see if it works properly.