What Tools Do I Need To Install Hardwood Floors

Installing a new hardwood floor is an expensive and beautiful way to update your home. Creating a patterned or seamless wood floor is very cost-effective and creates some nice space Wasatch Imbued can create some great tips and tricks for installing a new hardwood floor.

However, it can be somewhat of a expert tip and trick. Installing a new wooden floor requires two main steps. The first is to pick the wood type and the second is to plane the floor. Luckily, these two steps are super simple!

The most important thing when planning to install a new hardwood floor is knowing which areas of the house will need more protection. This includes being aware of potential places for water damage, children to walk on, or befalls, exposed beams.

When planning where the wood will go, it is also important to know which side of the room needs access to that piece of wood. It may be best to look into this before purchasing any lumber so as not to waste any material.



Once you have installed the hardwood floors, you will need to seal them. Most homeowners do not take this step because it is such an easy way to update the rooms in their homes, but it is very important!

Your flooring may require some special nails or fasteners to ensure it is properly sealed. Many times, these are included in your installation package, however, if you needed to purchase them, they were expensively priced.

If you need to purchase special nails or fasteners, look for ones that are at least double the length of the nail or nailhead that goes into the floor.


A saw is an essential tool for installing hardwood floors. Most homes do not have a saw, but if you have one, you are in the clear. You can still read how to install hardwood floors without a saw in this article!

A saw is used to cut long cuts of wood. These cuts must be parallel to the floor and pressed down firmly to create a seamless surface.

There are several different sizes of saws, all of which can be used on either hardwood or plywood. The main difference is whether or not the blade can be rotated or swedged. A swedged saw can only be rotated, while a rotating one can be swedged as well.

If you are looking at choosing between the two types of saw, ask yourself if you need the ability to rotate or swedge the board, respectively.

Flooring nailer

A flooring nailer is another key tool in the installation of a hardwood floor.


Most hardwood floors are installed using four-or-five-pitch screws. These screws are called four- or five-cornerscrews, respectively.

When installing a floor on a subfloor, these walls must be extended and then screwed down to hold the new hardwood floor in place. The new hardwood floor should be placed along one edge of the extension, and then two more layers of hardwood should be laid and screwed down over it.

These screws are referred to as four-or-five-cornerscrews, respectively. When placing them in place, make sure to leave an adequate space between each one for the screw to move in and out. If you do not have enough space between the screws, you will need to enlarge the spaces with some additional tools or adders!

These can be tricky if you are working on your own, as they require good judgement and skills to correctly use.

Flattening tool

When installing hardwood floors on a room-by-room basis, you need a flattening tool. These tools are typically rectangular and feature an edge that is concave to help guide the floor installer down the board.

This tool is called a flattening tool because it helps guide the installer in their job of installing the floor. It also protects the floor from damage during installation, due to the tool being higher than the floor.

Most professional installers have use of these, but home DIYers can also buy such tools. They can be found at fancy stores like furniture shops or home decorators supply stores, where they are commonly referred to as a lift off tool.

It is important for home decorators to have this tool for easy installation of new floors. Floors come in different heights, so if there is a lift off feature with this tool, then the decorator can easily work with them.

Putty knife

Creating a smooth, seamless floor is an art. Luckily, there are many tools that can help you create a beautiful floor.

Some common flooring tools include the putty knife, trowel, and dustpan. The putty knife is typically used to create pocketed spaces or valleys where stacked layers of hardwood does not meet.

The trowel is used to createAREAAREAAREAAREA AREAareaareareareare are where the new hardwood floors will be installed. The dustpan and bucket should be used to remove old flooring when the job is complete.

When working with very large jobs it may be helpful to rent or buy a lumber save-a-floor planter. These help keep the surface level and prevent water being forced down any valleys.


A new tool you need when installing a carpet or a hardwood floor is the square die. This tool can be had in many places, but it is not the only one you need.

Many tips for installing a floor such as using block chords or clips to mark locations for the die is also important. Once the floor has been laid, adding and removing coats of paint is another tool that must be used.

When painting a room, keeping an eye on how much depth you have in your furniture and decorating with some bright colorways is another critical piece. Creating some moments of relaxation are key!

Finally, watching your son rip up the floors with his shoes on and then playing on the same hardwood flooring you just installed is an enjoyable way to finish off your home improvement project.


Once you have the floor installed, the next step is to level the room. This can be done in several ways, but the most straightforward is by using a pencil and paper or laptop keyboard and monitor.

There are many ways to level a room, so don’t feel like you have to use the same method every time. As you change size of space and increase in length of space, you will need to change your leveling methods.

Some ways to level a room: Use a ½″ dry wall pencil on one side of the wall, measure up ¼″ with another dry wall pencil, measure down ¼″ with another dry wall pencil and slide them together creating a pocket of empty space. Put your new floor in place and let it sit for a day to thoroughly workuate. Then move around until it looks how you want it.