What Does Lf Mean On A Maytag Washer

Maytag washers are a common product. Washers can be single or double, and some can do wrapnel configuration. The most basic was the washer where the clothes are wrung out and then placed on a rug or wash surface to spin and dry.

The new washer where the clothes were wrung out and then placed on a rug or wash surface to tumble-dry. This is the type of washer you would find if you went to a restaurant or grocery store to buy one.

The new washer where the clothes were wrung out and then placed on a rug or bed to tumble-dynnly-tumble-drowe-out-of-them.

Quick drain cycle

what does lf mean on a maytag washer

When the washer is performing a regular cycle, it may need to be added into the quick drain cycle mode. This happens when there is not enough water being drained while the washer is in its wash cycle.

This mode can be done in a remote or not, you just have to turn the control knob to on and then off. When this one is active, there will be less water coming out of the wash unit and more passing through.

This helps get rid of any dirt that may have stuck to your clothes which would not wash out properly. It also helps save water as well as there is no doubt when you see how little water there is left after it is done.

Another thing to look for when in quick drain mode is if there are clear spots appearing where nothing seems to be draining. This might mean that something could be preventing enough water from coming out so that it can complete a wash cycle.

Water level too high

what does lf mean on a maytag washer

Maytag washers have a feature called water level. When this is installed, it displays a small gauge on the side that shows how much water is in the washer.

When this is enabled, it also displays a line across the top of the washer that shows how high the water level is. When this line is down, it indicates more water than what is needed to wash clothes.

This helps you to know when the washer needs to be refilled with water, or if your clothes are already wet. If your clothes are very wet, then you may need another brand of washing machine because one may not work in your house.

Water leaking out of the front of the washer

what does lf mean on a maytag washer

Maytag washers have a lf (lever fall) indicator that lets you know when the washer is failing inspection by a Maytag technician. When this happens, the washer will need to be replaced.

This indicator is located on the front of the machine next to the cycle start button. When it is broken, it will not display any wash images or sound when washing, which means that it is failing inspection.

If you have a Maytag Washer Hzr25A WHR26A or 27A, then you should check if the lf indicator is broken first. If so, then you should call a Maytag repair center to see if they can fix it for you.

Then, if your washer does not have this indicator, you can go to local hardware stores and look for a lever fall which indicates that the washer has failed inspection.

Washer will not drain water

what does lf mean on a maytag washer

When Maytag Washers are performing well, they will often stay full of water for a few minutes after the wash cycle is running. This is normal behavior as the Washer weighs a little over six pounds and it can take a while to make sure that it is thoroughly cleaning.

This is also what does not mean when a washer doesn’t drain at all or gets very watery. When this happens, it is usually due to poor installation or maintenance. You should investigate and check the Washer for issues such as weak connections, dirt getting trapped, or damage.

If any of these things are found, then you must fix them immediately! Looking into the issue and finding an answer are the first steps in resolving this problem.

Cycle takes too long

what does lf mean on a maytag washer

When the washer is programmed, it takes almost a month to receive your washer back in! This is very surprising and odd.

When the wasam is programed, it has a cycle date and time window set up for it. Once this date and time window is set, then it must be followed!

During this period, you must keep your washer covered with towels until it cycles. Then you can let it go! This must be done every single cycle, even if nothing is washed!

Washers have different cycles for different things. The one we have here does not have a quick-wash or delicate mode, so we had to make one for our washer.

Changing the water temperature

what does lf mean on a maytag washer

Changing the water temperature is an easy way to keep your washer running. When the water has cooled, it can easily push through clothes faster.

When the washer is new, it may not have had a label for this feature. After a few years, it may have added this feature as a security measure to prevent overheating of the clothes.

Some models have a light on the front that changes when the water temperature feature is in use. If you are having trouble with your washer not lfning or wetting even with these features on, try turning them off for a few minutes to see if that helps.

Washers come in different sizes so it is important to get the correct one for your house.

Adding extra clothes to the load

what does lf mean on a maytag washer

Maytag washers and dryers have a feature called add-on cards. Add-on cards allow you to add an additional load of clothes to your washer or dryer.

By adding the extra clothes onto your load, the washer or dryer can take up to three days to process the new information into your wash and/or dry. This feature is useful if you have more clothes you want to wash and/or dresses you want dried.

During this time, you can buy small packages of pre-processed clothing that have been carded into your washer. Or, you can rent some software that processes your new clothes into the washer for you.

This is a great feature to use as it gives time for items to be processed and laid out before being washed and/or dried.

Check the wash meter for errors or damage

what does lf mean on a maytag washer

When the washer is working, it sends a signal to the washing machine by the amount of clothes it has washed. When too many clothes have been washed, the washer meter goes up and down accordingly.

When the washer is working properly, it shows a wash and a dry on the screen. The wash should be coming out strong and organized, while the dry should be coming out crisp and beautiful. If this happens, you are washing your clothes correctly!

If any of your clothes look damaged or wrong-sized, they may need to be returned to the store where you bought them. Maytag washers have a short life span, so make sure you keep tabs on yours.

Leave a Comment