A lawnmower bag is a good investment if you have a large lawn to store your mower in. Many people who use their mower on a daily basis have this as they use the same spot every day to store it.
A large, heavy lawnmower requires a bag to safely and securely hold it while being transported. While some bags are adequate, there are much nicer ones that offer more features.
Some features that are available on the bags include weatherproof, water resistant, or even fashionable designs. These features can make the difference in how much you love your new bag.
Whether you have a small yard or a large yard, there is something right around here that needs mowing! The size of the lawn also depends on whether you have full or partial coverage.
Contents:
Buy the correct bag size
When you buy a new lawn mower, the bag that comes with it may be too small to hold the machine. You will need to buy a larger bag to hold your new machine.
That’s right- you have to buy a new bag! Thankfully, this one is the right size for your Toro model!
If you have a smaller sized lawn, look into buying a smaller bag. If you have a large lawn, look into buying a bigger bag.
Either way, your new mower will be safe and sound in its case! Many machines come with safety features built in to prevent damage if the bag gets lost or is removed.
The best way to keep your new mower safe is by using the correct size bag.
Buy a Toro replacement bag
If you’re looking to buy a new lawn mower bag for your Toro, here are some things to consider.
First, check if your new bag has a replaced label or replacement label. If so, this means it has been used and repaired before being sold as a new bag.
Second, make sure the length of the replacement bag is long enough to fit the entire package of your lawn mower. If not, either cut off some extra length or purchase a longer bag.
Third, make sure the vinyl lining is thick enough to protect the inner part of your Toro or that it is waterproof. If not, do not buy a vinyl lining that is only waterproof- this would be very thin and vulnerable to rain and water damage!
Lastly, check that the lock on your new lawn mower bag works well so you do not have to worry about it getting locked or unfastened.
Disconnect the bag on your mower
Once your Toro has finished using the bag, it is time to disconnect it. You can do this by pulling a tab or pin that connects the bag to the mower unit.
To make this easy, you can use a corded phone cable to connect the bag to the mowing unit. You will need to remove this once you have started mowing.
This way, you can put your Toro in your car and take it to a Pep Boys store for repair. Or, you can have it professionally fixed at an Toro dealer location.
Either way, after repairs are done, you will have to reconnect the bag on your Toro at home.
Remove the old bag
Once your bag is full, it is time to remove it. You can do this by pulling the side handle out or by simply removing the whole assembly.
Either way, your old bag will come off with it! This is a simple way to keep your new lawn mower safe and sound.
Replace the new bag and go to it! You will probably have to cut some extra grass to get everything out, but that is a cost of quality equipment.
If you have difficulty removing the bag yourself, you can call a trusted company to take care of this for you. They may even send one directly or send one directly packaged with your new mower.
Lawn Mowers are not designed to be heavily loaded, so if you have large trees or other obstacles in your yard, make sure you have a replacement Lawn Mower Bag that can handle the weight.
Put the new one in place
Once your new lawn mower bag is installed, you’re ready to go! You can start your mowing immediately. Try it out to see if you like it!
If you don’t want to use the new bag, then just remove the old one and wash it with soap and water to prevent any residue.
Alternatively, you can just leave a few inches of clearance around the edge of the new bag so that your old one can fit in at some point.
Either way, thanks for reading! If you have any questions about this article or about replacement Toro bags in general, please feel free to ask below.
Connect the bag onto your mower
Next, connect the bag to your mower using the supplied tubing. This is done by sliding the bag end into the bag connector on the mower.
Then, wrap both ends of the tubing around the wall of the mower to secure it. Finally, pull up to start it spinning and let it work!
This process may seem complicated at first, but it is very quick and easy.
Fill with grass cuttings
When you’re ready to mow your lawn, the first thing you’ll need to do is put everything away. You’ll probably have some clippings or grass roots left over from previous attempts, so it’s time to make a new bag!
You can fill the Toro Toro Lawn Mower Bag with grass cuttings or leaves as well as grass. We recommend leaving some extra room in case you have more cuttings in your bag.
This is a great way to extend the life of your bag as well as give you extra items to put into it while mowing.
There are many companies that make replacement bags for Toro products. Most of them are very affordable and they work just fine! Try looking through Amazon or eBay to see if there are any new models coming out.
Replace when full
Most people leave the bag at their mowing store, but you should have a ready source here. It should always be at your side, even while the mowing is in process.
You can easily give it a quick fill after each use to keep it full, and ready to go. There is a handle on the bag that you can pull up to fill it, so don’t forget that!
Having the bag available will also help if you need to quickly replace the cut while still waiting for the bag to charge up. You can simply grab a new one and put it on immediately!
Bullet point ended here. You can find these replacement Toro bags every where, they are very affordable and easy to get.