A tool called a wire stripping tool is a piece of non-electric, mechanical, paper-like material that can be used for removing insulation from both power and telephone lines. Allied to a phone line or power line, the tool can be put to work on an adjacent wire.
Using a wire stripping tool can save you some serious cash, as well as time in getting your home or business cleaned up of excess power and telephone lines. It can also help you save yourself some serious trouble in the future, since a properly functioning network system will only require a small number of tools to restore service.
It is important to note that using the wrong tool for the job can cause damages to your home or business, so take your time to research which one does what.
Contents:
Buy automatic wire stripping tool
If you are looking to upgrade your wire striplin tool, you should buy the Buy automatic wire stripping tool. These tools come with various dials and indicators to show you the status of the tool.
The dials and indicators make it easier for you to begin changing your wire in as little time as possible, which is why it is important to buy this tool.
Some of these features include the trigger bar, cover plate, and scale. The trigger bar keeps the device balanced while using the device, the cover plate keeps debris from collecting on it, and the scale shows you how much wire you have left.
When using your automatic wire stripping tool, look for any discolorations or breakage.
Pick correct size wire to strip
When using an automatic wire stripping tool, make sure to observe the following rules.
Only use the tool on standard-size electrical wires (3/32 inch or less in diameter) and standard-size telecommunications wires (3/16 inch or less in diameter).
Only use the tool on clear vinyl barbed wire and nonviny fiber wire. Other types of wire must be cut on a hot metal cutting grid, such as a disk or sheet of aluminum.
Only use the tool on clear vinyl barbed wire that is at least 3/8 inch thick. Other types of nonviny fiber wire may not be stripable by using this method.anthaisever, this may be due to two things: first, some automatic wire stripping tools are designed for size discrimination, whereas others are not. second, there are some tools that do not work as advertised.
Load the wire into the tool
Next, tightly grasp the tool until you can see all of the wire in the housing of the tool.
Then, slowly pull the tool out of the die. The tool will release some of the wire as it rotates, and will continue to do so as it works through the paper.
Push the button to start stripping
When the tool is fully loaded with paper, pull the trigger to start stripping
The strip mechanism will begin cutting paper as soon as the button is pressed. This tool is a little complicated to use, so be prepared for some tricky angles and large pieces of paper.
This tool can be awkward to handle at first, so take your time to get use of it. Once you do, you will be transported into another world of paperwork bliss!
You will probably want to do some practicing on an old piece of paper before trying this on a piece of furniture or even your bed frame.
Keep handle held down until all wires are stripped
After the striping process, hold the tool down until the green light comes on. This indicates that all wires have been stripped. You will see a line of powder coming off of the head of the tool.
You can now let go of the tool and it will take itself out!
If you need to remove some wires before then, you can do so but your paint may bubble up and leave a residue on your hands due to heat and pressure being applied to the wire. This is not harmful but instead of using an automatic wire stripping tool, you could use a regular wire stripper making it easier to get all of the paint out.
Check the finished product
When the wire is stripped, it should be able to return to its original shape. This can be checked by sliding it back into its housing. If it does not return to its original shape, cut off the excess and repeat the steps until you have a smooth surface.
This tool is great for creating intricate projects such as wires and trinkets hung on a wall or even a ceiling. It can also be used in workshops and educational thrillers where there is a need for very fine wire.
In case of any problems such as breakage, burn or stickyness, contact your project organizer or school immediately. Any teacher or person working with children may have something to put on their medical license to prevent burn or stickiness of the wire.
Repeat if needed
When doing a large wire stripper tool length, it is important to repeat the process. Doing only one pass will result in some of the wire being cut short due to lack of depth.
This is due to the tool being mounted on a frame that holds the tool in place. The frame allows you to move the tool and position the cut.
If passed through one full pass, most of the wire will be removed and you will have more exposed metal. If needed, a second pass can be done to complete the job!
This process can be done in stages- first applying high pressure, then removing some pressure before starting new pass.
Use the right size tool for the job
When using an automatic wire stripping tool, be careful not to use too small of a tool or the wires will not be stripped. A small hand or feet can leave smaller sized edges that are not possible to remove with the wire stripping tool.
Another tip is to hold the tool with both hands, not just one hand. This will prevent accidental removal of the wires and strips them correctly.
When removing insulation from wires, do it slowly and carefully. If you pull too hard, you may break a wire and have to start over again! Arrange the tools in a row in your workspace so they are used properly.
Automatic wire stripping tools are very helpful in home projects, because you do not have to buy special equipment to fix common bugs such as unplugging during power outages.