A lot of people discarding disposable razors are running into problems removing the blades from the razor. Luckily, there are ways to get the razor back in shape!
Most companies offer their blades as a set. You get the same set of blades with your order that comes with a new razor in the package. So, if you need to add or remove a blade, you can do so easily.
You can also buy your own set of separate discs. These can be placed inside the safety container and then sent to your local drug store or manufacturer to exchange for another one.
This article will go over some tips on how to remove the blade from a disposable razor. Most tips here will be done by putting some heat protectant on first and then pulling off the razor.
Contents:
Apply even pressure
When removing the blade from a disposable razor, make sure you apply enough pressure to the razor. You want to pull the razor out as slowly as possible, right?
Shaving with a disposable razor can be fun! But, if you pull on the razor too hard, you may damage it.
gravity will pull the blade down and out. If this happens, try pulling on the razor slightly harder to prevent new hairs from sticking to the blade.
Another thing to watch out for is when you need a new blade. You can buy a safety deposit box-like service where you store your razors until you need a new one.
Wiggle the blade back and forth
If the razor is new, try wiggling the blade back and forth for a few times before you attack it. This helps set the hair into movement and let the razor get used to it.
If the razor has been used, then try wiggling the blade in a circle or a circle with no hair on it. This helps spread the hairs apart and remove some of the lubricant from the blade.
Use your wet hand to hold and apply shaving cream or soap to all parts of your skin at once. Then, gently twist off one side of the razor and begin removing hairs. Using a different thread of water and/or effort can help prevent breakage or slipping on dry hairs.
Try loosening the blade with hot water
If you use a wet-shampoo or soap to wash your hair, you can try putting it on the razor just before you start shaving. Or try using a conditioner instead of shampoo and bathing in water while shaving is a helpful reminder to be on alert.
Both of these things reduce the amount of time the razor must stay attached to your hair. When loosening the blade this way, be careful not to hot-wash out the protection film that keeps the blade nice and sharp.
Some razors cannot be cleaned with water alone. These include some models designed for children, curved blades, or ones that have very distinct shapes on them such as handles or cartridges.
Try loosening the blade with soap
Some blade-removal tips don’t have any specific names for, they just mean try loosening the blade with soap. This may sound strange, but it can help!
With soap, you can let it work on the razor and make it easier to remove the blades. If you are struggling to get the razor off, then try adding some water to the razor to loosen up the rubber housing and help prevent further resistance.
Alternatively, you can use a safety pin or hair tie to stop the blade from continuing its journey off the razor.
Use a razor blade remover tool
A properly designed tool can help you remove a blade from a disposable razor. A tool that is not designed properly can cause you to lose your blades or cause you to have to buy new ones because the new one does not work.
To use a blade remover tool, look for a small package of something that looks like soft rubber bands. These contain small pieces of metal that can be easily slides into openings on a razor. When these openings are close to the rubber band, it becomes difficult for it to move inside of the razor.
Using a tool like this will save you from having to take out and dry off the razor every time you want to shave. It also prevents you from shaving with an old blade that still has life left in it, providing more time for you to find another way to remove the hair.
Ask at your local drugstore
Most drugstores will not sell disposable razors that have blades on them. This is due to safety concerns! Having a razor with a sharp blade on it is like having a knife nearby that you can use.
If the store does have these razor models, they will only offer you this one usage from the razor and must send it back if you don’t want it. They charge a fee to return the razor so they get your money!
Given the fact that there are people who may have diabetes or other issues that require low blood sugar, these types of razors would be of little help for them. Also, since there is no protection against gouging/cutting into skin, this would not be an effective way to prevent skin cancer.
Call customer service for your brand of razors
If your brand of shaving razor is not listed on your razor’s packaging, you can call customer service for help removing the blade from the razor. Most companies have a toll-free number where they can assist you in this way.
Many companies offer a free trial so you can see if they work for you before you purchase their product.
You can ask how many shaves should go into taking off the first piece of hair, or if it was needed to be removed to generate more cash for the company.
Swap out your brand of razors for a new one
Most stores that sell disposable razors give you two options: replace your razor or buy a new one.
When you buy a new razor, you are responsible for learning how to use it. There are many resources to learn how to take care of a new razor so it last!
You can try practicing on the cheap at home with a $1 store razor or buying one of those fancy ones that cost several dollars. Or you can take up trying your favorite brands at the local drugstore andLERIDI- YOU!
Either way, make sure you are being careful when taking your new razor out of the package and laying it on your face.