Making wooden letters stand up is an easy way to show off your skills as a woodworker. All you need is the right technique and tools!
In this article, we will discuss the best way to make wooden letters stand up. When done correctly, you will have created a beautiful tool in your collection.
We will start by talking about what makes a wooden letter stand out from the start. A wooden letter stand is usually round or square in shape. These letters can be small or large, plain or decorated!
The most important part of making a wooden letter stand is to begin with the bottom. This starts with building on one side of the bottom and ending with adding on the other side.
Contents:
Locate the center of the letter
Now, locate the circle that lies in the middle of the letter. That’s where the A is supposed to be.
Locate a place near that center and stick your paper there. Now, pull up your finger and press down slightly to create an indentation. This will ensure your letter is thick enough.
Continue creating indents for each of the letters until the whole letter is shaped like a circle. Tap a pen or pencil on the shape to make it pop up.
Push a metal or plastic wire into the center of the letter
Then, wrap the wire around the metal or plastic several times to create a groove. This ensures that the letter will stay up.
Make sure to keep an eye on your lettering as you add more grooves! If they are not sticking down, they can break apart
Adding a little glue to hold the letters in place is helpful to keep from having to use heavier duty glue and stronger materials for the letters.
This method works for wooden letters as well, just make sure to use enough glue to hold the wood together and prevent it from cracking when pressed down.
Twist the wire and shape it into a hook
Now create a twist in the wooden letter wire. Twist the wire to form a hook. This creates more space inside the letter.
Now that you have added space inside the hook, add some sides. Add some foam to strengthen the letters and add texture.
Try using white, light brown, or dark brown paint for the paint color to achieve these different looks.
How to make them stand up is to put glue on one end and push a paper clip or another small item of nail polish onto the other end. Let it dry, repeat with more glue and paper clips until all six letters are standing up.
Hang the letter using the hook
Now let’s hang the letter. You will need to use the same hook to hang the letter. Simply thread the hook through the slot and then wrap it around the wooden post until it is secure.
Now that your wooden letters are standing up, let them do their job—drawing attention!
How to Make Wooden Letters Stand Up done! Now that your wooden letters are standing up, let them do their job—drawing attention!
Try changing up your letters’ heights and creating new shapes with them by playing with how high or low you hang them.
Once they are mounted, leave them for a day to dry before mounting another letter. This helps prevent possible stress on the letters and starts new growth of the tree.
Let it dry completely
Once the wood is dry, it needs to stay that way! You can either let it dry in a natural climate or in a warm climate, or simply leave it out to dry.
If you do have to keep your letters out in the weather, make sure to protect the wood from damage such as water or dirt. This can be done by using oil or water-based glue and/or paintable surfaces (such as foam) for your letters.
If you want your letter to be slightly rounded, then you must cut a small hole in one end of your log. You can do this easily with a knife or saw.
Once they are dry, let them sit at least a week before carving! This allows the paint to adhere properly to the board and sends them through their evaporation process.
Polish with oil or wax
If your wooden letters look dry, try using a bit of oil or wax on them. A little might help preserve the wood’s natural moisture content.
Waxing your letters can be tricky. If you do not have enough wax, your letters will stick to one another and break apart. To avoid this, make sure to get at least a thick layer of wax on all of your letters.
You can also use too much wax and it will break down, leaving your letterpress pieces with no polish at all. It is important to keep an eye on your waxes and give them a rest when they need it.
Another tip is to use Goat’s Milk soap instead of the standard bar soap.
Use magnets to hold it up
Creating a letter stand up is a fun way to do some visual education on how paper, computer software, and printer technology can be used for educational purposes.
You will need several sheets of magnetic paper, which is what the letters are held up on. You can buy these at retail stores or online.
When you print the letters, make sure to leave some space around the edges for the letter to hold up. You will need to add some force to it when creating it.
Once you have made your letter, place one end of it in a fridge bag and let them sit for an hour before using them. This helps protect the wooden materials from heat and pressure while creating your letter.
To use them, take one end of the bag and pull out the corresponding side so that there is a clear area where you can insert your finger.
Find a flat surface to rest it on
When you write your letter, you want to make sure the wood is dry before you put any lines on it. If the wood is wet, then your lines will not stick.
You can test this by rubbing some ink on one side of the piece and then writing a line. If it sticks, then it is dry!
Make sure to let your wooden letters dry completely before writing on them with ink or pen. This takes a few days depending on the temperature of the water.
After doing this for some letters, you can start building your structure! Let’s begin with finding a base for our letters.
What if we built our letter A as a square? Then when we wrote A on it, it would stand up! We would have to repeat this process for each square we wanted our letters to go on.