How To Level A Mobile Home

Leveling a mobile home is an art, a science, and an engineering feat. It all starts with the soil. Mobile home leveling is defined by how deep the soil is. If the soil is light, it will not raise the mobile home up to level with Nessie!

Light soils give you more depth for your leveling tools. These include gravel, sand, or beach pebbles that you use as coping or base material. If you have very hard to reach areas in your mobile home, you may need rockers or something similar to add height to the bottom of the mobile home.

Medium soils are where most leveling companies start their leveling efforts. These levels have some sand or gravel as a coping material, but not every bit of it must be used. You want enough space between the beds for the leveling to happen in!

Heavy soils are where most companies stop their work and demand a visit from our LTE! These levels require special equipment and/or materials that cannot be replaced onsite.

Prepare the ground

When building your mobile home, you need to prepare the ground. This means getting a clear area where you can put your supplies and equipment, and where neighbors can see your mobile home.

This also means leaving room around your mobile home for expansion when the need arises. You’ll want to leave plenty of space for future occupants to move in and use the space you have now.

Figure out what supplies you’ll need during lumber cutting, summer construction, or winter use. These might include woodburning tools, flooring materials, and insulation. Then buy all of these things years ago!

Prepare like this early on as well as you do some things immediately after construction is over, people will be more willing to help if they know there is room to work.

Have a professional level the mobile home

Leveling a mobile home is similar to building a mansion out of cards. You must have enough space to spread out your mobile homes and make room for the landscaping that surrounds the community.

To ensure that your mobile home level has adequate drainage, look into having sloped sides and check for water logging or soggy spots. If these conditions are present, it is more difficult to secure your mobile home on top of the hill.

To increase privacy, try using some form of flooring or vegetation at the bottom of your level. If those conditions are met, then you are ready to start building! Once the level is built, start adding furniture and decorations to complete the setting up process.

Make sure all windows and doors are sealed properly

If you have any windows or doors that are open or that don’t seem sealed, then the water will go inside. You want as much water as possible out, so make sure they’re waterproof.

To make them Level a mobile home, you must first make sure all sides are waterproof. Then, you must test the door to see if it closes and leaves no way in or out. If it does, then it is level!

When building a mobile home, you must test how high the ceiling can be and whether or not it’s level. Make sure there are no low spots where the water could spill out. If there are, then you may need to add more levels of insulation to prevent heat loss.

Run utilities to the site

If you plan on running power and water or sewage and cleaning up at the site, you must take steps to prepare the site for civilization.

Modern utilities such as electricity, water, and sewage are very sophisticated. Without having them, you would be out of luck!

Some utilities require permits from your county office, called corporate licenses. If you have them, you can network without too many restrictions. But if you do not, then research where you might want to connect and build from there.

Many places have free wiring diagrams that show all the possible connections. If you need to add power or water or sewage oroaals or sircetionals or anything else, they are available for an affordable price.

Ensure that the site is free from obstructions and is large enough to accommodate a mobile home

A level is a process of systematically increasing the height of a home by adding on additional floor levels. When a home has more than one floor level, such as when an attic and a second-story bedroom are combined into one level, then there is no need for the level to be improved through construction of additional floors.

Many times during a remodeling project, when looking at the existing home and determining which floor level needs improvement, there may be some confusion as to what item or items need to be raised.

While reviewing the structure, some people may not have noticed some small items such as an old box bed or box bed that has been re-used as an underlayment in another home. By raising these items and ensuring they are in good condition before proceeding with the remodeling project, the new remodeled home will look more complete.

Have your septic system inspected before placing your mobile home on it

If your mobile home is located in a septic system, you should have it inspected by a professional before putting it on.

Mobile homes can break down and refill from the ground, requiring maintenance from below. When these homes are built on a level surface, this is done with the assistance of an underground system called a subbase.

When the mobile home is removed, this subbase must be maintained so it can recharge the system when needed. Many companies offer this service and will charge you more if you have more components or heavy furniture attached.

Having your subbase inspected before placing your mobile home on it will save you from having to dig down deeply to repair any underlying problems.

Use stabilizing devices

When roofing a mobile home, you must use roofing devices such as plastic roof tiles or roof bars. Both of these can be placed on and off the mobile home to level it.

These can also be used underneath the mobile home to stabilize it against wind and water. Having these helps lower the risk of blowing away or having water damage.

Some of these devices are for small mobile homes andrero style, where the top is fixed in place. These require less skill to level than plastic tiles or bars that can be slid under the mobile home.

Check for proper drainage around your site

It is important to check for blocked drain lines and possible drainage tile or disruption around your site-theres. If you notice this, call a professional immediately to correct it.

To properly level a mobile home, first find the back door by looking for any signs of water flow. If there is none, then you have successfully leveled your mobile home. Once that is confirmed, then check for underground pipes or wires due to potential damage from the roof leaked water.

If those happen are found, then it is time to dig! Using an electric knife, I would cut open the roof about an inch and carefully remove all the old material from underneath. Then, use a piton and push through the bottom of the roof to seal it off.

Leave a Comment