When your trap is overfull, it can cause difficulty in walking or sitting down, and can also result in painful bowel movements or constipation. This is known as a trapped condition and is typically diagnosed when the trapped condition becomes bothersome or impossible to ignore.
Because of this, it is important to regularly check your trap for obstruction or removal of material. Additionally, you should give it a good flush to remove any hardened feces that may have stayed in the tube.
Flushed greasy waste can come out more easily than blocked ones, so if you are one who runs out offlush time, you may need to look into how often you are cleaning your trap.
Contents:
Once a week
Most people recommend cleaning your grease traps once a week. This is because after the trap gets full, it can take up to a week for it to drain and pour out. During this time, you should allow the trap to cool down before working on it.
After that time has passed, you can start working on it again! It is important to stay knowledgeable about your pipes and plumbing systems, though. Many timespipe manufacturers suggest a quick clean every week or two, but there may be a reason for this.
The reason may be maintenance such as changing out filters or checking level of liquid flow. If there is no change in several weeks, then maybe the filter or pump is needing replaced. Taking care of your plumbing system can also lead to less maintenance on your own end.
Once a month
Most people think that grease trap cleaners should be done more often, like every week or two. This seems like a lot of work that needs to be done every day, but it only takes a few minutes each day to make this ongoing cleaning happen.
The truth is that once a month is enough time to clean your grease trap. Once a year is enough time to replace the filter. Between those three things, you can rest easy!
Monthly cleaning is good if you are doing this weekly or daily. If you take the time to do it once a month, then you will have enough time to give your tank some love and maintain your system due to the lack of use over the past month.
If you are going daily, then weekly is better as there will be space for error. A weekly reset can avoid having trouble taking down old leftover waste from food and liquids that has not been removed over the past month.
Ask your restaurant owner
How often should your grease trap be cleaned depends on the type. There are three main types of grease traps:
o Hot oil traps : These heat up automatically when a fry or dirty dish is placed in it. You will need to remove the fried or dirty dishes before cleaning the trap.
: These heat up automatically when a fry or dirty dish is placed in it. You will need to remove the fried or dirty dishes before cleaning the trap. Under-the-radar traps : These do not appear to heat up, but if something washes into it while it is sitting there, it can become clogged. It would be best to check it often to ensure clear passage.
: These do not appear to heat up, but if something washes into it while it is sitting there, it can become clogged. It would be best to check it often to ensure clear passage.
Grease traps should be emptied whenever they reach minimum capacity
When a grease trap is empty, it will not absorb any oil or grease. This can be dangerous! If a trap is not empty, it can overheat and possibly break.
To prevent this, many systems recommend empting the trap every three to four days to ensure it is taking in enough water. This process helps ensure the trap is maintaining a good level of oil and greasees.
When the trap does need to be emptied, you can do so by removing the bottom plug and letting the water run out until nothing more comes out. You can then fill thetrap up and flush!
This way, you avoid having dirty water sitting in the system and affecting your other plumbing fixtures. It also helps to maintain a visual of how much grease and oil the system has taken in.
Wash your hands before handling the grease trap container
When working with grease trap containers, be sure to wash your hands and other surfaces before proceeding. This includes the floor, sofa, or chair you’re sitting on while you clean the container.
You can also wipe down the counter or table with a damp paper towel to make it more hygenic.
Washing your hands and other surfaces before cleaning the trap is important to keeping your unit working at its best and preventing infections.
Also note that washing your hands will help ensure you get an accurate odor reading when taking a sample of a grease or oil deposit. If a smell isn’t correct, then there may be issues with how much oil or grease is inside the unit.
How often you should clean your Grease Trap will depend on what size unit you have and what kind of usage it gets each day. Typically, small units (less than six gallons) should be cleaned once per day, medium units (six to twelve gallons) every second day and large units (over twelve gallons) every third day.
Use dry soap to clean the grease trap container
Instead of a water-based cleaner, use a food grade soap made for grease traps. The soap should be readily washable and able to remove grease and oil stains.
Why Use This Type of Soap? Once the grease trap is cleaned, the container must be rinsed to ensure that any remaining oil and grease are removed. Without taking care to do so, this could create an oily mess to handle.
How To Use This Type of Soap To Clean The Grease Trap Another great reason to use a food grade soap is that it does not contain harsh detergents or foaming agents that can cause damage to your trap. Instead, these ingredients are removed with water or simply left untouched due to its nonfoaming quality.
Wembley Filter manufactures some of these soaps which are ideal for greasy traps.
Use dry paper towels to clean the grease trap container
Instead of using a water hose, you can use only a dry paper towel. You should do this at least twice a week to keep your trap clean.
This way, you do not have to worry about water coming in contact with the trap as it sits. You can also use only one hand to hold and move the paper towel to remove as much grease as possible from the trap.
At least twice a week is recommended to keep your trap free of grease. This is due to traps getting full of water and becoming less effective.
Rinse out with water and dry thoroughly before replacing cover
After you use a tissue or the wipes provided to clean your trap, leave it covered with a folded over tablecloth or towel to prevent dirt and grease from getting onto the wrUpdated: The wipe or tissue should be handled by the person only once due to potential food particles, so be careful!
After every use, check your trap to see if anything has fallen into the bottom. If so, remove and wash immediately to prevent it from hardening.
If all goes well, try using it again in a few days time to let it dry out more. If there is still water sitting in the bottom after several days, take it apart and check for leaks.
If that does not help, then you need to replace the base! Make sure you get one that is made of strong material so that your trap does not break when it gets stuck inside of it.