How Golf Irons Are Made

Golf iron is one of the most common male-only sports, with over a million players worldwide. It’s also very affordable for you to start playing! There are many different brands and models, so you will be able to find one that fits your needs.

In this article, we are going to talk about how irons are made. This includes the parts that make the iron and ironing instructions. If you are new to ironing, this article will tell you how!

Irons come in several guises: They may be wooden or plastic or some combination of the two. They may be leather or nail polish or composites made out of computer chips and paper.

Contents:

Machining

how golf irons are made

The second method used to make golf irons is by machining. This involves using a tool to shape a section of an iron.

Machining is typically done on a computer or with a woodworking tool. The process can be very precise, which is useful for creating different lengths of clubs.

Many companies use CNC (computer-controlled) machines to cut the clubs. These machines look something like high-tech drills with little levers you hold in your hand.

How they do it: The cnc machine operator uses a program called an engraver to design the outline of the club and then uses the machine to carve it out. Then the operator tests it to make sure it fits properly and feels comfortable in your hands.

Heat treatment

how golf irons are made

The next step in the manufacturing of golf irons is heat treatment. This process can consist of ironing the club before or after forging, or it can be done during the forging process.

Heating an iron is done in two ways. The most common way is to let it sit out on a hot surface for a few minutes before using. This works because the iron gets cooled off by being inside a oven, and also by being placed in a pan before heating.

The second way to heat an iron is to put it in a dryer. This works because even if the iron does not get totally cold, it still stays cool if it is kept dry.

Assembly

The first step in making an iron is to put it together. There are five main parts that make up the iron: the head, the shaft, the grip, the crown, and the heel. These pieces must be assembled correctly for it to work.

The Head

The head of an iron is where you place your grip. There are two types of heads: contour and non-contour. A contour head has a concave surface that sits on your fingerboard. A non-contour head does not have a fingerboard and does not have a place to put its grip.

The length of a head’s fingerboard determines its length of life. Short fingerboards (less strength due to being on only one side of the wooden chip. This would be like having one side of your body with no arm or leg support.

Testing

how golf irons are made

After years of mass-manufactured irons, manufacturers are now required to test their products. This is thanks to the U.S. Congress!

Testing is done for several reasons. One is to ensure that the consumer gets an accurate product that meets brand standards. Another is to show consumers that they care about their customers’ needs and wants.

But most importantly, this testing helps determine what minerals and other materials are in their irons and how well they hold a edge on the clubface during impact. This information helps in the design of new irons and how well they perform against others brands’ irons.

Irons made from composite materials do not have testing, but steel ones do due to safety concerns.

Marking

how golf irons are made

Most golf irons have a small line or marking on the bottom that is usually diamond-shaped or rounded. This line is called a tolerance line and it helps set the Clubsite Rule for the length of each clubface face.

The tolerance line is measured from side to side as well as up and down. This ensures every clubface face is equal in length, making it easier to read play on each clubface.

This rule was created to make it easier for clubsitters to tell whether one club is longer or shorter than the others when playing match play or tournament golf.

Polishing

how golf irons are made

Most golf irons are polished to a high shine, making it hard to identify them. Some irons are chrome-plated, some are fiber-filled, and some have leather grips.

Polishing has become more prevalent in the past few decades due to the increased exposure that clubs have today. This is generally done by using a soft cloth or dry brush to polish the iron.

Dust removal

how golf irons are made

The process of making a golf iron begins with cleaning. Most manufacturers sweep and dust their tools in between each phase of production.

After sweeping and cleaning the tool, the manufacturer processes it in an oven to dry it. Then, they test it to see if it is sharp. If it is, they pass this step!

If not, they take another one out and try again! It is really important that these attempts be made so the tool is perfectly sharp on every shot.

The final step in making a golf iron is removing the concave side. This side allows the player to hold onto the club longer before shots lost their shape break them down. Having a concave side also helps keep more metal on metal during game play!

This last part can be done either by cutting a new edge or sanding down the old one to get a smooth surface.

Rubbing compound application

how golf irons are made

As the name suggests,rubbing compound is applied to the surface of golf irons. This prevents sand and soil away from entering into the barrel during manufacturing.

The main ingredient in rubbing compound is clay. The clay works as a lubricant, binding together the various pieces of an iron to prevent rusting.

But it also makes the iron harder and longer, giving your game more spin when you hit your iron shots.

Irons are different than other metal objects in that they do not require a temper to adhere to them. Instead, they are wrapped in a soft material such as leather or wood and then heated and dried.

When making an iron, one first begins with choosing the kind of wood they would like to use and then creating a blank surface on which to wrap it. They then use a hot ironsetting tool or rivet gun to ensure every piece is pinned down.

Leave a Comment