Loader-rated headphones are a great way to save money by only spending money on the parts of your headphone system that are needed. By purchasing only the earsplitter and headband of a pair of headphones, for example, you can save a significant amount of money!
By not buying the cord and case, for example, you will still get full value from the product! ? You may have seen these pieces attached to the earsplitter or headband when it is installed.
There are many ways to install load-rated headphones. Some users use computer software and devices such as an Apple iPod or iPhone application kits, or simple on/off switches.
Contents:
How to burn in your headphones
Once you have subscribed your headphones to a strong signal, it is time to give them their first burn in. This means that you must put them on and listen to them for a short period of time without doing anything else to them.
Burn in is all about listening to your music for a short duration – but don’t take our word for it. Before using any headphones, go out and listen to some music for a few hours at least.
We highly recommend using cheap-to-quality headphones, as they can really help test the waterproofness of your device. By putting very cheap headphones on your device first, you will get more accurate feedback as to whether or not the headphones are waterproof.
After approximately thirty minutes of listening, remove the headphones and lightly dry them with a cloth or hair dryer.
Take your time
When you first start burning in your headphones, it is important to take your time. You do not want to be frustrated and take action because you feel out of it. You want to be comfortable and have the knowledge to use this process, right?
You want to get the best results possible? You want to enjoy your music? Then take your time!
He or she who tries their earphones on too soon and tries their headphones on for the first time when they are feeling anxious, stressed, or just want to listen to music for fun usually get frustrated because they feel like it is taking forever.
Listen to soft music
If you want to listen to louder music or more rough music then do it! You will notice a difference in your hearing though. You will also have to move your head less to hear what the music is doing.
If you like soft music then try listening at higher volumes. The softer the music the less pronounced the effect of the headphones will be.
If you like hard rock or heavy metal styles of music then these genres are perfect for you. You will get out of them what you put them on!
How much head movement you get out of these effects depends on how quiet the music was in the first place. Very little movement can result in no Headband Effect at all.
Avoid loud noises
When you are listening to music or watching a movie or sport, avoid any sort of noise that you would hear while walking, running, etc. When you do this, you will notice that your feet and legs are more relaxed and your body is breathing more evenly.
This is because your footfalls and soundssync better with the music or movie audio. By doing this, you will find that the audio is more natural and that the image looks better on the screen.
Also, when doing sports such as running or football playing, keep some sort of protective headgear on. This will prevent any significant head injuries as well as reduce boredom since there is nothing to do!
Using earbuds or headphones can be a pain in the neck when trying to put them in and take them out of sight. Making sure they are stored properly can also help with this.
Use the same color headphone
Most important note: Do not mix and match colored headphones. If you have a black headphone, do not put a red or orange cord in front of it to make it look like a new piece of equipment.
These colors may affect your hearing in some way, and should be addressed by a professional.
Using different kinds of headphones can also affect the burn in. For example, using leather on one headphone and rubber on another will change the heat transfer between the two materials. This can effect how long the headphones last, how loud they can be pulled out of the head, and whether they feel comfortable or sturdy.
Overall, burn in is an art form that requires proper tools and expertise.
Switch between ears
When listening to music or watching a movie or display, you can switch between either ears. This is possible due to the shape of your hearing system.
Most people have a circular earpiece placed in their outer ear with an insert placed in their middle ear. This allows you to rotate the earpiece onto your other hearing system.
This is how people can wear both conventional headphones and over-the-ear headphones at the same time. Over-the-ear headphones keep a bit of audio permanence as they require more space to hold and rotatably rotate on your head.
Conventional headphone users can change tracks or modes by rotating the cups on their heads back and forth. Both methods are valid for this application as well.
Lay them flat
If you are using headphones that have a flat design, try laying them flat on a surface before connecting them. This may help with starting a connection with the device or each other.
If you have an over-the-ear style headphone, try turning them so the outside is facing up and then placing your mouth on the outside to connect. This may help prevent audible sound from coming in as well.
Bounce backheads are one way to keep your headphone cables bouncing back into shape. By doing this, you will also get better audio quality!
If you are looking into wireless headphones, check out our article on how to make sure they stay connected. Some tips include using soft cloths to hold them onto the receiver, and having a good lanyard or band around your own wrist to put around the receiver.
Roll them up
When you’re ready to listen to your music, it’s time to get happy! You can do this either by rolling up the headphones or by taking off the headphones.
When you take off the headphones, make sure to lay them face down to prevent any water damage. Once you roll them up, that’s it! You can now go about your day without worrying about them. They will last for a long time because you don’t spend much on sound quality anyway.
How many times do I have to burn in my headphones? This has nothing to do with sound quality, but we are reviewing headband types here. If you want more support for your ears, then get more padding!
We recommend using medium–high quality ear buds or headphone clips so that you do not have to buy too much additional material.