When your bathtub or shower is clogged, you need to take care of it immediately. If you let this problem sit, water will continue to flow away but in a slow, steady stream. This can lead to damage to other systems in your home such as your drains or faucets.
Fortunately, this is not very common nowadays. Most homes have a tub and/or a shower so it is easy to fix. More commonly, drain problems arise. Often, these issues are something like a blocked sewer or flooding due to a collapsed sewer system.
Drains are one of the most important parts of a bathtub or shower system. You can buy special drain plugs or put new ones on that correct the issue instead of changing the whole system.
Bullet point lifted earlier was an introduction to some home remedies for clogged drains and flooded bathrooms.
Contents:
Pour vinegar down the drain
When your bathtub is clogged, you can try pouring household vinegar down the drain. This will help dissociate water and drainage systems to work out.
Just make sure you do not exceed your supply of vinegar, because you would be wasting precious water! You can also try sugar and water, but this may cause damage to your plumbing system.
Another home remedy is to put baking soda in the bathtub. This will neutralize the acids in the water to Dissolve the clog. Remember that baking soda can cause some minor burns if it gets into your eyes, so make sure you have a clean eye protection plan before trying this out.
However, neither of these solutions are very hygienic so do not attempt these in your own bathtub! It is better to call a technician if you have a hardwater situation or there is evidence of recent usage.
Put baking soda down the drain
Baking soda is a common ingredient in many household cleaners. It neutralizes unpleasant chemicals, making them harmless and effective. Unfortunately, it can also clog drains too!
baking soda is a common ingredient in many household cleaners. It can be found as an air freshener and as a foamer for dishes. Due to its soft, gentle texture, people are more likely to use it to clean things.
Because of this, people who have had trouble with clogs or broken pipes may have used too much or the wrong product to address the issue. Using too much baking soda can also hurt plumbing components such as pipes or seals, making it difficult or impossible to flush away the clog.
Put salt down the drain
Placing salt down the drain can remedy a number of problems, including clogged drains and damage to your plumbing system. While this may seem strange, it is very safe!
Salt contains many chemicals that weaken the matter in your pipes. When this happens, it can help free up some water or sewage that can remove the blockage.
Yet, it also can result in expensive warranty repairs. Therefore, you should do this only by a qualified person or company.
You should also check your plumbing every year to make sure it is still healthy. In the summer time, water may seep up through your pipes due to melted Winter rains. This should be prevented by installing winterizing material such as covers on your pipes.
Use a clogging powder
If your bathtub is not clogged with a large amount of water and dirt, then you can use a powder called a clogging powder. Clogging powder can help prevent hair and hair dryer clips from turning into balls of dry hair and hair, making it difficult to flush away waste.
Because the water takes up more space in the tub, bathtub owners must be careful about how much they flushes. Too much soap or too many liquids will not go down the drain easily.
Bathtubs are generally not recommended for children because of the possibility of falling and hurting themselves. Young children can be clumsy when it comes to baths, making them take extra steps to prevent water from being spilled.
Use only mild soap and only one day per week that a tub is needed.
Use a foaming chemical spray
It is very rare for a bathtub or shower facility will have a sprayuve chemical on hand to clear a clogged drain. Most facilities will recommend using a TV tube or large piece of paper to determine the size of your plumbing.
However, if the plumbing in your home is small, then you can use a fine-grade TV tube or some cheap toilet paper. Once it is clogged, it is hard to remove and throw away. It would take a few attempts to find the culprit, but with enough time, you could!
Use one of these tips when trying to clear your plumbing: spray the drain with either water or an air dryer before attempting to locate any blockage. Or use some soap and run it through the pipe until it gets clean.
Run hot water down the drain
Boil water before attempting to clear a drains bathtub. This ensures that the water is hot when trying to run down the drain.
When washing hands, make sure to air dry completely before putting away or sharing the sink or shower. Also, when putting away laundry, put all items into a large zippered bag to prevent struggle while sorting through items.
When trying to clear a drains bathtub, start from the top down, doing small projects at a time. Start with pouring about half of the hot water into the tub, then adding just enough more water until there is just enough room for your item.
Smell your sink before dumping things into it
Most people don’t even think about smell before, but if you have a very smelly bathroom or shower then you should! By smell we mean using a perfume or perfumed wash cloth.
By not having a smelly bathroom or no perfumed wash cloths at all, your tub and/or pipe is more susceptible to build up. Build up can become a costly nightmare, financially and aesthetically.
When cleaning your tub or pipe, use a high quality detergent that has been superscentated for maximum cleaning performance. Don’t use the cheap, low quality soap that comes in tube form because it won’t withstand the tough job of cleaning out the pipe and tub.
Lastly and importantly, check your water pressure in your home as needed.
Use a plunger to clear your clogged drain
Some plumbing tools, such as a plunger, cannot be installed or removed. This means your bathtub or shower can only be cleared with these tools!
If you do not have a plunger, you can still use the same basic steps to clear your drain. Use a container of water and a strong enough detergent to loosen dirt and grime.
Try some prescribed slow movements to make sure your drain is working properly. If the tub or shower is heavy enough, you may just need to use the plunger anyway.
After you have done all of these things, check them out to see if they worked by putting in some water and having someone touch it with their hand.