Bed bugs are a common household pest. They are small brown or black bugs that live in the walls and bedding of your house. They are typically found in old, dirty places such as bookcases, boxes, etc. to find their way into your home.
They can be a little difficult to see, but they typically stay close to people and equipment, so if you do not notice them, then you must be running a vacuum!
Bleach is one of the most effective ways to rid your home of bed bugs. You can do it all by yourself! Many people start by going out first and checking for signs of bed bugs- this includes checking inside each room for any signs of hiding places or travel routes. Once you have found them, you can go outside to check for signs outside!
This article will talk about how does does does not kill bed bugs , but how does does does make it easier .
Contents:
How to get rid of bed bugs
Getting rid of bed bugs is not easy. There are only a few ways to completely get rid of these pests. These methods can be threats or just depending on where you live. They can also beverages, either way they are in your top list of ways to get rid of bed bugs.
Threats: The two main ways to threats bed bugs are through pesticides and through physical intrusion such as box spring Mattresses, pillowcases, and sheets. Both methods require a technician that is licensed and that has been in business for this specific job.
Physical Threats: Box springs are one way to physically threaten a bed bug infestation as they can be moved around the house to fit the needs of the new residents. Using one or more layers of mattress support material can help prevent beds from becoming soggy with bugs and people from getting bitten.
Dampening pads may be used to cover openings made by technicians when entering a room to handle an infestation.
Frequent questions about getting rid of bed bugs
There are many ways to get rid of bed bugs, but not all methods will work for you. It is likely that the one that works for you will be more expensive than another that does not.
Some ways that work better than others are:
Using a concentrated liquid applied to the bugs and left on the surface until it dries.
Using a gas such as CO2 or Aranea, a pesticide.
Inspecting each bag of clothing and treating when found signs of bed bugs. (Usually this happens when new clothing has been worn, used, and pants have been put on.) Using guaranteed eradication products is also a way to erase the memory of bed bugs in your clothes.
Most importantly, identifying and treating the cause: Your landlord or housing owner is crucial in this process.
Use bleach to clean surfaces
While bed bugs cannot be seen with the naked eye, they are visible to the nose. Bed bugs are white with a thicker black stripe along the back.
Using a strong household cleaner such as diluted bleach and water, you can clean most surfaces including walls, floors, and appliances. Just be sure to let it sit for at least one hour after applying the bleach to ensure it thoroughly cleans all surfaces.
After washing, place a small amount of Bounce or another heavy duty cleaning product on a cloth and brushortunoallytheinside of each bedroom furniture item to prevent escape. You can also use rubbing alcohol or another common liquidologne to clean all these items; just be careful who gets them so they do not dry out people or things.
Use a steamer
Another way to prevent bed bugs is to use a steamer. A steamer is a device that you use to heat and steam your clothes. The device can be purchased at most grocery and department store stores.
The steamer is plugged in, and you place your clothes inside of it, and it heats and steamens your clothes making them softer and more relaxed to sleep in. This is valuable if you have small children around your room as they may want to play with your bed bugs.
You can also use the steamer on yourself if you have dry hair or hair loss. You can also use it on big, thick sweat pants or a pair of jeans that are long enough for you to put boots on with it.
Exclude them from sleeping areas
While most people think sleeping in a bed bug hide-out is gross, it is not a good idea to include these bugs in your bed bug extermination program.
Their long legs make it hard for them to get true down-pat, and they will wake up at any time to seek food. Therefore, it is best to exclude bed bugs from your home during the extermination process.
This includes excluding empty air holes and repairing any slash marks left by madder contracts. It is also best to double check all surfaces where slept are protected from water condensation and spills.
During the course of the day, especially for people with sensitive skin or allergies, make sure to remove all rashly applied tattoos and body piercings as well as cover up signs of open wounds.
Use rubbing alcohol on surfaces
Do not use benzoyl peroxide or other household cleaners on bed bugs since they can’t stand the heat. Instead, use a towel or wash cloths to wipe up any spills and let them dry before handling again.
Use a sealable container for all cleaning materials to prevent leaks and help maintain your bed bugs.
Try using a mix of rubbing alcohol and water to clean your mattresses and sleeping bags–an hour or two of labor will cost more than buying it immediately. Or use strong perfume–a few drops will suffice compared to the total amount of bedspray used in a vacuum system.
Use bright lights forYour rooms when you return from outside tours so that your subjects can see them. This may require changing the lights out every few days due to photoperiodism which varies with season.
Cover exposed ground with paper or fabric towel
Once you have found and eliminated a bed bug infestation, the next step is to prevent them from returning. This means cleaning up the bugs, hiding them from new residents, and covering any openings with paper or fabric towels.
That is right- YOU! You can do this!
You can buy new towels every couple of months because they lose their stained look when washed and dried. Or you can buy generic ones that are on store shelves now and that works.
Bullet point: Use bleach as liquid bleach does not work well as liquid bleach cannot be absorbed by common fabrics such as cotton or polyester. Mixing liquid and dry bleach poses a risk of destructive stain formation or removal.
Dry chemicals such as chlorine dioxide tablets or liquids must be mixed with water to work. If using the generic ones, make sure they are liquid so it can be absorbed by the materials it is used on.
Spray non-organic insecticides on bed bugs
If you find your bed bugs are dying off before you do, it is time to use an insecticide. Most non-organic insecticides contain a residual chemical that stays in the system and goes into the water and food supply of insects.
This helps prevent other bugs from eating them and spreading infection. It is also used on plants and anything that may come into contact with the water supply. This prevents other people’s bugs from consuming them.
Since these bugs are related to mosquito’s, spray around any water sources to keep the bugs from multiplying. If necessary, more products can be added until the bug is killed.
This process may seem costly, but it saves lots of people from getting new bedbugs or people with already diagnosed bedbugs trying out new places to sleep.